Control Panel; General Description - Toshiba e-studio 167 Service Manual

5.

CONTROL PANEL

5.1

General Description

The control panel consists of button switches to operate the equipment and select various modes, and
LEDs and an LCD to display codes, values and the states (including each mode) of the equipment. The
button switches, the LEDs and an LCD are mounted on the control panel PC board (HPNL) and are
installed the inside of the control panel.
When the operator's attention is required, graphic symbols appear with messages explaining the condi-
tion of the equipment in the LCD panel.
5
Fig. 5-1
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
CONTROL PANEL
5 - 1