Toshiba e-studio 167 Service Manual page 184

(3) Release the harness from the harness clamp
and pull out the discharge LED.
[D] Main charger
(1) Take off the discharge LED unit.
P.11-11 "[C] Discharge LED (ERS)"
(2) Pull out the main charger and take it off by
sliding it to the rear side.
Note:
Be careful not to touch or scratch the drum
surface at this time.
[E] Main charger grid
(1) Take off the main charger.
P.11-12 "[D] Main charger"
(2) Remove the spring and take off the main
charger grid.
Note:
Do not touch the mesh area of the grid.
e-STUDIO167/207/237
DRUM RELATED SECTION
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
11 - 12
Discharge LED
Fig. 11-14
Main charger
Fig. 11-15
Main charger grid
Spring
Fig. 11-16