Toshiba e-studio 167 Service Manual page 90

[B] Control panel PC board (HPNL)
(1) Take off the control panel unit.
P.5-7 "[A] Control panel unit"
(2) Remove 2 screws and take off the cover
while sliding it.
(3) Take off 2 brackets by removing 2 screws
each.
(4) Remove 11 screws, disconnect 1 connector,
and then take off the control panel PC board.
e-STUDIO167/207/237
CONTROL PANEL
Bracket
Control panel PC board
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
5 - 8
Cover
Fig. 5-9
Fig. 5-10
Connector
Fig. 5-11