Toshiba e-studio 167 Service Manual page 210

(7) Disconnect 2 connectors, remove 3 screws
and take off the bracket.
(8) Remove 1 E-ring and take off the guide roller
on the front side.
(9) Remove 1 screw and the gear.
e-STUDIO167/207/237
DEVELOPMENT SYSTEM
Connector
E-ring
Gear
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
12 - 16
Bracket
Fig. 12-19
Guide roller
Fig. 12-20
Fig. 12-21