Toshiba e-studio 167 Service Manual page 37

[G] ADU cover
(1) Open the bypass tray.
(2) Open the ADU cover.
(3) Open the transfer unit and release the ADU
stopper on the front side.
(4) Remove 1 screw and take off the ADU stop-
per on the rear side.
Note:
Be careful not to fall off the ADU cover when
the screws are removed from the ADU stop-
per.
(5) Take off the ADU cover while sliding it toward
the right.
[H] Right front cover
(1) Take off the front cover.
P.2-18 "[A] Front cover"
(2) Open the ADU cover.
(3) Pull out the drawer.
(4) Remove 2 screws and take off the right front
cover.
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADU stopper
Fig. 2-18
Fig. 2-19
Right front cover
Fig. 2-20
2 - 21
ADU stopper
ADU cover
e-STUDIO167/207/237
OUTLINE OF THE MACHINE
2