Toshiba e-studio 167 Service Manual page 161

(3) Take off the bypass pickup clutch with its
shaft.
(4) Remove 2 E-rings. Then remove the gear,
cover, spring and cam out of the shaft.
Note:
When assembling the bypass pickup clutch,
be sure to adjust the position of the hook of
the spring and cover so that the center slit of
the cover and the center of the cam are
aligned.
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Bypass pickup clutch
Fig. 10-26
Spring
Cover
Gear
E-ring
Fig. 10-27
Cover
Spring
Fig. 10-28
10 - 17
E-ring
Cam
Shaft
Hook
Cam
e-STUDIO167/207/237
PAPER FEEDING SYSTEM
10