Replacing A Hard Drive - Gateway E-4000 User Manual

Chapter 7: Adding or Replacing Components

Replacing a hard drive

Use these instructions to replace the hard drive.
To replace a hard drive:
1
Identify your computer case style. For more information, see
your computer case style" on page
2
Open the case by following the instructions in
page
3
Disconnect the drive cables, noting their locations and orientation. (You
will reconnect the cables after you install the new drive.) See the drive
documentation for further instructions.
172
158.
www.gateway.com
106.
Data ribbon cable
Power cable
"Identifying
"Opening the case" on