Gateway E-4000 User Manual page 163

7
Slide the new system board into the keyhole slots and lock it into place
with the thumbscrew.
Important
8
Reconnect the power and data cables using your notes from Step 4. See
the system board documentation for further instructions.
9
Reinstall the add-in cards by following the instructions in
replacing add-in cards" on page
10
Close the case by following the instructions in
page 134.
The new system board must have special standoffs
( pem studs ) mounted on the bottom of the board. If
necessary, use the standoffs from the original system
board.
147.
www.gateway.com
Gateway Micro Tower Case
"Adding or
"Closing the case" on
157