Sample Copy - Ricoh SP 5200S Operating Instructions Manual

2. Basic Copying
• If you are copying from the exposure glass, a single copy of each original is made first. If the first
copy set is acceptable, you can make the remaining copy sets by pressing the [ ] key. The time
required for copy sets to be delivered varies depending on the print settings.
• When placing originals on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
2
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• You can change the settings for the Sort function under Input / Output in User Tools. For details,
see "Input / Output".
• Paper sizes and orientations that can be shifted when delivered to the finisher shift tray are as
follows:
• Standard size
A4 , A5
, 8 × 13 , 7
C6 Env , DL Env , 16K
• Custom size
Horizontal size: 148.0 216.0 mm (5.83 8.50 inches), Vertical size: 140.0 356.0 mm
(5.52 14.01 inches)
• When the number of copies exceeds capacity, copying stops. If this happens, remove copies from
the tray to resume copying. For details about the number of copy sheets that the output tray can
accommodate, see "Appendix", About This Machine.
• p.195 "Input / Output"

Sample Copy

Use this function to check the copy settings before making a long copy run.
• This function can be used only when the Sort function is selected.
1. Select Sort and any other necessary functions, and then place the originals.
2. Enter the number of copy sets with the number keys.
70
, A6 , B5 JIS , B6 JIS , 8
1 1 1
/ × 10 / , 5 / × 8
4 2 2
1 1
/ × 14 , 8 / × 13 , 8
2 2
1 1 1
/ , 4 / × 9 / , 3
2 8 2
1 1
/ × 11 , 8 / × 13
2 4
7 1
/ × 7 / , C5 Env ,
8 2