Sample Copy - Ricoh Savin en5100WD Operating Instructions Manual

Sample Copy

Use this function to check the copy settings before making a long copy run.
• This function can be used only when the Sort function is selected.
• To use Sample Copy, select [Press Start Key] under [Feed Start Method] in System Settings. You
cannot make sample copy when [Auto] is selected.
1. Select Sort and any other necessary functions, and then place the originals.
2. Press the [Sample Copy] key.
One copy set is delivered as a sample.
3. If the sample is acceptable, press [Continue].
The number of copies made is the number specified, minus one for the proof copy.
• If you press [Suspend] after checking the results, return to step 1 to adjust the copy settings as
necessary. Depending on the combination of functions, you may not be able to change some
settings.
BKY050S
Finishing
79