Remove The Shipping Materials; Prepare The Image Drums - Xante ColourLaser 21 Series Setup Manual

5

Remove the Shipping Materials

Remove any shipping
tape and external
packaging materials.
Pull up on the release
latch and open the
cover.
6

Prepare the Image Drums

Lift out the black
image drum (the one
furthest to the right).
6
Remove (grasp, twist,
lift) the cardboard
shipping restraint from
behind the LED heads.
A
C
a. Remove the protective sheet.
b. Remove the tape.
c. Push the tab (1) in the direction of the arrow
and remove the blanking plate.
Pull the blue fuser roller lever to the right (away
from the open cover) and remove the orange
transport lock, then push the fuser roller lever to
the left as far as it will go (toward the open cover).
B
Place the drum back into
the printer, then repeat this
process for each of the
three remaining drums.