Xante ColourLaser 21 Series Setup Manual page 16

13
USB Install: Windows (cont.)
USB Install: Windows 98
©
Printer Drivers (Adobe PostScript, PCL)
©
On-Line XANTÉ ColourLaser 21 Series
User's Guide
• Minimum requirements: i486 processor, 16 MB
RAM, Microsoft Internet Explorer 4.0 or higher.
• Can also be viewed directly from the CD (click the
"View User's Guide" button in the Menu Installer
dialog box).
©
Color Swatch Utility
Provides a printout of color samples with RGB
settings. Use the settings in application software to
precisely match the sample color in printed files.
Install the Software
First, Install the USB Port & PostScript Driver
Turn the computer on and wait for it to boot up.
Turn the printer on.
The Add New Hardware Wizard for USB Device
window appears.
Insert the XANTÉ ColourLaser 21 CD into the
CD-ROM drive, then click Next.
Select Search for the best driver for your device
(Recommended), then click Next.
Select CD-ROM drive, then clear the other devices
and click Next.
When XANTÉ USB Driver appears, click Next.
The USB port information is copied to the system.
When the USB port install is complete, click Finish.
The printer is detected and the Add New Hardware
Wizard for XANTÉ ColourLaser 21 appears.
Click Next.
Make sure Search for the best driver for your
device (Recommended) is selected, then click Next.
Click Specify a location, making sure other choices
are cleared.
Click Browse and navigate to your CD-ROM drive.
Browse to \Drivers\Win9x\English\Psdrv on the
XANTÉ CD, then click OK.
Click Next and complete the installation following the
on-screen instructions.
16
Second, Install the PCL Driver and/or
Additional Software
With the XANTÉ ColourLaser 21 CD in your
CD-ROM drive, click Start
Browse to your CD-ROM drive and double-click
install.exe in the root directory, then click OK.
Click the button beside Printer Software and follow
the on-screen instructions.
!
When the Port Selection window appears, leave
LPT1 selected, then click Next.
Exit the Menu Installer.
Third, If You Installed the PCL Driver
If you installed the PCL driver, you need to associate it
with the USB port. To do this:
®
Click Start Settings
Right click the Xante ColourLaser 21 PCL driver
icon, then select Properties.
On the Details tab, select XECUSB1 (ColourLaser
21) in the Print to the following port drop down list.
Click Apply.
Click OK.
Close the Printers window.
Using the Installed Software
To View the Printer User's Guide
®
®
Click Start Programs
Series ColourLaser 21 User's Guide.
To Open the Color Swatch Utility
®
®
Click Start Programs
Series Color Swatch Utility. (For more information
on the Color Swatch Utility, see the on-line XANTÉ
ColourLaser 21 Series User's Guide.)
Activate the Duplex Unit and
Internal Hard Drive in the Printer
Driver
See page 11 for instructions on how to do this.
®
Run.
®
Printers.
®
XANTÉ ColourLaser 21
®
XANTÉ ColourLaser 21