Xante ColourLaser 21 Series Setup Manual page 20

16
USB Install: Macintosh
USB Port Connection
!
No USB interface cable is supplied with the printer.
Use a USB cable that is compatible with USB
specification 1.1.
Notes:
• Requires Mac OS 9.04 or higher
• Printer operation is not assured if another USB
compatible device is connected concurrently with it.
• If a USB hub is used, it must be connected directly to
the computer.
• Depending on the size of the document, if the memory
setting for the print monitor is low, you may not be
able to print in the background. To correct for this,
increase the memory setting for the print monitor.
• Depending on the model you have, you may need to
install updates to the operating system in order to use
USB, e.g., iMac Update 1.0, iMac Update 1.1, iMac
Firmware Update, etc. For further information, contact
Apple Computers.
Turn the computer and the printer off.
Connect the USB cable to the USB port on the
computer (1).
Connect the other end of the cable to the USB port on
the printer (2).
20
USB: Install the Driver &
Software Utilities
!
Be sure to switch off antivirus software before
installing a printer driver.
Turn the printer on, then turn the computer on.
Place the CD supplied with the printer in the
CD-ROM drive, then double-click the CD icon that
appears on the desktop.
Open the MAC folder, then the PSDrv folder, then
the ENGLISH folder.
Double-click the XANTÉ PSInstaller icon, then click
Continue.
If you wish to install only the driver, click Install.
If you wish to install the driver and the utilities, select
Custom Install from the drop-down box, then select
the items you wish to install (XANTÉ Colourlaser
21, XANTÉ Swatch Utility [see page 11 for more
information] and/or Fonts Downloader), and click
Install.
When the installation is complete, click Quit.
USB: Create the Desktop
Printer
Double-click the Apple Extras folder on your local
hard drive, then double-click the Apple LaserWriter
Software folder.
Double-click the Desktop Printer Utility icon.
Highlight Printer (USB) under Create Desktop.
In the drop-down box, select LaserWriter 8 and click
OK.
Under PostScript Printer Description (PPD) file,
click Change.
Make sure the "Printer Descriptions" folder is
selected in the drop-down box.
Highlight your XANTÉ printer model, then click Select.
Under USB Printer Selection, click Change.
Highlight your XANTÉ printer model, then click OK.
Click Create.
The XANTÉ printer icon appears on the desktop.