Electrical Hazards; Radio Transmissions - Logic Instrument Fieldbook I1 User Manual

2.1 Electrical Hazards

2.1.1 Cleaning / Servicing
Always disconnect the Fieldbook I1 from the power source before cleaning or servicing it.
2.1.2 Power Adapter
Contact authorized service personnel for repairs.
Logic Instrument power cables meet industrial requirements for low-temperature flexibility, UV resistance and oil
resistance. Use only supplied power cables from Logic Instrument.
If other power cables are used, the following may apply:
The operator is solely responsible for the resulting damage;
•
All Logic Instrument warranties are void.
•
2.2 Environmental Hazards
Do not use the Fieldbook I1 in locations near flammable gases or vapor.
The use of electrical equipment in explosive environments can be dangerous.
Always turn off the device when near a gas station, fuel depot, chemical plant or a place where blasting
•
operations take place.

2.3 Radio Transmissions

2.3.1 Permitted Transmission Power
Follow the national regulations for the maximum permitted transmission power. The operator is solely responsible for
this type of operation.
2.3.2 Radio Frequency Limited Locations
Considering the radio frequency limitation in hospitals and aircraft, the Fieldbook I1 can only be installed with
permission.
Industrial computers may affect the function of implanted medical devices such as pacemakers and may cause
malfunction.
4