Changing A Supervisor Password; Resetting A Supervisor Password - Logic Instrument Fieldbook I1 User Manual

5. Verification of the password is required. Tap the same password again and tap Enter to confirm the new
password.
6. Saving the Settings
a. Tap "Home" in the bottom bar
b. Tap the "Save and Exit" button
c. Choose "Exit Saving Changes"
d. Confirm with "YES"
After setting the Supervisor password, the password is required to access the BIOS Setup Utility.
4.4.2

Changing a Supervisor Password

1. Access the BIOS Setup Utility (Refer to chapter 4.2 Accessing the BIOS Setup Utility on page 26)
2. Go to Security > Account's Password Status.
3. Tap the Enter icon next to Setup Supervisor Password.
4. Enter the current supervisor password.
5. Enter a new password.
6. Enter the new password again to confirm.
7. Saving the Settings
a. Tap "Home" in the bottom bar
b. Tap the "Save and Exit" button
c. Choose "Exit Saving Changes"
d. Confirm with "YES"
4.4.3

Resetting a Supervisor Password

A supervisor password cannot be reset. In case you forgot your password, please contact your system administrator or
the Logic Instrument support.
30