Logic Instrument Fieldbook I1 User Manual page 29

2. Enable Legacy Boot
a. Locate the Legacy Boot setting in the Boot Features
b. Tap on the menu bar to switch "On" the legacy boot
3. Enable USB Support
a. Navigate to Advanced (Bottom navigation bar) > System Component
b. Tap on the xHCI mode bar to switch "ON" the xHCI mode
4. Saving the Settings
a. Tap "Home" in the bottom bar
b. Tap the "Save and Exit" button
c. Choose "Exit Saving Changes"
d. Confirm with "YES"
The BIOS settings are configured and the Windows 7 operating system can be installed.
28