5.4.1
Security Settings
In the security section you can set a password to protect the admin menu from unauthorized access. You can either use
the windows administrator or an individual password.
Password required: Check this option to use an individual password to protect the access to the admin menu. Use the
fields on the right side to set a new password.
Windows Admin Password required: Check this option if you want to use the same password to protect the FieldControl
admin menu from unauthorized access like the password you use for the computer's operating system administrator
account.
No password required: Check this option if you won't protect the access to the admin menu. This could be the case if you
are the only one who uses the computer. If a password is already set, you will be asked to input the current password in
order to remove the password protection.
Current password: Type in here the current password if you like to set a new one. Leave this field blank if currently no
password is used.
New password: Type in here your new password.
Repeat new password: Type in here the same password like you did in the field new password.
5.4.2
Other Settings
Launch FieldControl at Windows startup: Check this field if you like to start the FieldControl application direct with the
operating system start.
Search automatically for FieldControl updates: Check this field if you like the FieldControl application to inform you when
a new FieldControl version was released.
Make "Stealth mode" available on this computer: The Stealth Mode is a security feature for military and special forces
application. Once the Stealth Mode is activated:
The screen brightness is dimmed to 0
•
The status LEDs are turned off
•
All radio signals are turned off
•
The volume is set to 0
•
The touch screen is locked to avoid accidentally inputs
•
All hardware buttons are deactivated
•
Check this field to make the Stealth Mode available. To activate / deactivate the Stealth Mode press and hold down F-
button and F3-button simultaneously.
36
Need help?
Do you have a question about the Fieldbook I1 and is the answer not in the manual?
Questions and answers