Preset - FLIR SyncroIP Series Software Manual

1. Select Scan under PTZ Settings.
Select Scan
Start Scan
Save left position
2. Click Set.
3. Move the camera into the desired left position and then click Set Left to save.
4. Move the camera into the desired right position and then click Set Right to save.
5. Click Save.
6. Click Start to start the Scan.

Preset

You can save preset positions in the camera to recall them later.
To save presets:
1. Select Preset under PTZ Settings.
2. Enter the number of the preset you would like to save.
3. Move the camera into the desired position.
4. Click Add to save the preset.
To go to a preset:
1. Enter the number of the preset you would like to go to.
2. Click Goto.
To delete presets:
Select Preset
Enter the preset number
Go to preset
Set up Scan
Save right position
Delete preset
Save preset
Web Configuration Interface
6