Adding User Accounts To The Cms - FLIR SyncroIP Series Software Manual

To change the CMS admin password:
1. When logged in as the admin account, click Config(
2. Under Old Password, enter the old password.
3. Under New Password and Confirm Password, enter the new password.
4. Click OK.

Adding User Accounts to the CMS

You can create multiple user accounts for the CMS with varying levels of access to the system.
These user accounts are only used for access to the CMS software and are separate from the
passwords on the or IP camera systems.
NOTE: To make sure users must enter their user name and password to access the CMS, you
must make sure Verify User is checked and Auto Login is unchecked in Config>Options. For
details, see "Configuring CMS Options" on page 51.
To add a user account to the CMS:
1. Click Config Manager>User Manage.
2. Click Add.
3. Configure the following:
• User: Enter the user name for the account.
• Password/Confirm: Enter the password for the account.
• Name/Sex/Information: (Optional) Enter descriptive details about the user account.
• Right: Check the permissions that will apply to the user account.
4. Click Save. Click OK to save changes.
Click Add
)>Modify Password.
Enter old password
Enter new password
53