Synapse Interface - Motorola DS6708 Product Reference Manual

4 - 24 DS6708 Digital Scanner Product Reference Guide

Synapse Interface

Parameter # F0h ACh
The auto-detection of a Synapse cable varies in duration depending on the type of Synapse connection. If you
connected a digital scanner to another scanner using a Synapse cable, use the Auxiliary Synapse Port
connection. In all other cases, when using the cable, the default setting is recommended.
To disconnect and reconnect the digital scanner from a Synapse cable that is connected to a live host via a
Synapse, use the "Plug and Play" setting. Do not change this setting from the default if an on-board wedge
host is enabled.
*Standard Synapse Connection
"Plug and Play" Synapse Connection
(01h)
(0Ah)
Auxiliary Synapse Port Connection
(32h)