Page 3
Symbol DS6607 Product Reference Guide 72E-69537-03 Revision A March 2007...
Page 4
The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola.
Revision History Changes to the original manual are listed below: Change Date Description 72E-69537-01 3/2005 Initial release. 72E-69537-02 10/2005 Software updates. 72E-69537-03 2/2007 Update service information, add option for Host trigger mode, change RSS references to GS1 DataBar.
Introduction The Symbol DS6607 Product Reference Guide provides general instructions for setting up, operating, maintaining, and troubleshooting the Symbol DS6607 Standard Range and Symbol DS6607 High Density digital scanners. Chapter Descriptions • Chapter 1, Getting Started provides a product overview, unpacking instructions, and cable connection information.
Indicates Default Related Publications The Symbol DS6607 Quick Start Guide, p/n 72-67311-xx, provides general information for getting started with the digital scanner, and includes basic set up and operation instructions. For the latest version of this guide and all guides, go to: http://support.symbol.com.
English, Portuguese-Brazilian, and Japanese. • Configuration via 123Scan. Unpacking Remove the digital scanner from its packing and inspect it for damage. If the digital scanner was damaged in transit, contact Motorola Enterprise Mobility Support. See page xvi for contact information. KEEP THE PACKING. It is the approved shipping container; use...
Symbol DS6607 Product Reference Guide Setting Up the Digital Scanner Installing the Interface Cable 1. Plug the interface cable modular connector into the cable interface port on the bottom of the scanner handle. (See Figure 1- 2. Gently tug the cable to ensure the connector is properly secured.
Getting Started 1-5 Connecting Power (if required) If the host does not provide power to the digital scanner, connect an external power supply to the digital scanner: 1. Connect the interface cable to the bottom of the digital scanner, as described in Installing the Interface Cable on page 1-4.
Symbol DS6607 Product Reference Guide Wall Mount To use the optional wall mount to mount the digital scanner on a wall, place the mount in the desired location on the wall and secure by inserting two screws* appropriate for the mounting surface through the screw holes on the mount, and into the surface. Insert the digital scanner into the mount as shown.
Page 25
Symbol DS6607 Standard Range Digital Scanner ........
Scanning 2-3 Introduction This chapter provides beeper and LED definitions, techniques involved in scanning bar codes, general instructions and tips about scanning, and decode zone diagrams. Beeper Scan Window Trigger Figure 2-1. Parts...
Symbol DS6607 Product Reference Guide Beeper Definitions The digital scanner issues different beep sequences and patterns to indicate status. Table 2-1 defines beep sequences that occur during both normal scanning and while programming the digital scanner. Table 2-1. Beeper Definitions...
Scanning 2-5 Table 2-1. Beeper Definitions (Continued) Beeper Sequence Indication ADF Programming: Error Indications. Duration of tones are very long. Lo/Hi/Lo/Hi beeps Out of rule memory. Erase some existing rules, then try to save rule again. (It is not necessary to re-enter the current rule.) Lo/Hi/Lo beeps Cancel rule entry.
Symbol DS6607 Product Reference Guide Scanning in Hand-Held Mode Install and program the digital scanner (see Setting Up the Digital Scanner on page 1-4). For assistance, contact the local supplier or Motorola Enterprise Mobility Support. Scanning with the Digital Scanner 1.
Scanning 2-7 5. Hold the trigger until the digital scanner beeps, indicating the bar code is successfully decoded. For more information on beeper and LED definitions, see Table 2-1 Table 2-2. This process usually occurs instantaneously. Steps 2 - 4 are repeated on poor quality or difficult bar codes, until the bar code is decoded, the trigger is released, or the Decode Session Timeout is reached.
Symbol DS6607 Product Reference Guide Scanning in Hands-Free Mode The optional Intellistand adds greater flexibility to scanning operation. When the digital scanner is seated in the stand’s “cup,” the digital scanner’s built-in sensor places the digital scanner in hands-free mode. When the digital scanner is removed from the stand it operates in its normal hand-held mode.
15.2 20.3 25.4 30.5 35.6 50.8 55.9 Depth of Field Figure 2-7. Symbol DS6607 Standard Range Digital Scanner Decode Zone for 1D Bar Codes Note: Typical performance at 68˚F (20˚C) on high quality symbols. Top of scanner 6.6 mil PDF417...
10 mil Code 39 Postnet 10.1 12.7 15.2 17.8 20.3 Depth of Field Figure 2-9. Symbol DS6607 High Density Digital Scanner Decode Zone for 1D Bar Codes Note: Typical performance at 68˚F (20˚C) on high quality symbols. Top of scanner 5 mil PDF417 6.6 mil PDF417...
Maintenance and Technical Specifications 3-3 Introduction This chapter provides suggested scanner maintenance, troubleshooting, technical specifications, and signal descriptions (pinouts). Maintenance Cleaning the scan window is the only maintenance required. A dirty window can affect scanning accuracy. • Do not allow abrasive material to touch the window. •...
Page 38
Normal when Beep on <BEL> is enabled and the and Beep on <BEL> option is enabled. digital scanner is in RS-232 mode. If after performing these checks the digital scanner still experiences problems, contact Motorola Enterprise Mobility Support. See page xvi for contact information.
Maintenance and Technical Specifications 3-5 Technical Specifications Table 3-2. Technical Specifications Item Description Power Requirements 5 VDC + / - 10% @ approximately 220 mA RMS (nominal), 500 mA (max) Depending on host: Power Source • Host powered • External power supply, 5.2 V nominal UPC/EAN, UPC/EAN with supplementals, UCC/EAN, JAN 8 &...
Symbol DS6607 Product Reference Guide Digital Scanner Signal Descriptions Bottom of digital scanner Cable interface port Pin 1 Pin 10 Interface cable modular connector Figure 3-1. Digital Scanner Cable Pinouts The signal descriptions in Table 3-3 apply to the connector on the digital scanner and are for reference only.
Page 41
User Preferences Introduction ................4-3 Scanning Sequence Examples .
User Preferences 4-3 Introduction If desired, program the digital scanner to perform various functions, or activate different features. This chapter describes each user preference feature and provides the programming bar codes necessary for selecting these features. The digital scanner ships with the settings shown in the Table 4-1 on page 4-4 (also see Appendix A, Standard Default Parameters...
Symbol DS6607 Product Reference Guide User Preferences Parameter Defaults Table 4-1 lists defaults for user preferences parameters. There are two ways to change the default values: • Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the...
User Preferences 4-5 User Preferences Set Default Parameter Scan this bar code to return all parameters to the default values listed in Table A-1 on page A-3. Set All Defaults Parameter Scanning Parameter # ECh To disable decoding of parameter bar codes, scan the Disable Parameter Scanning bar code below. Note that the Set Defaults parameter bar code can still be decoded.
Symbol DS6607 Product Reference Guide Beeper Tone Parameter # 91h To select a decode beep frequency (tone), scan the Low Frequency, Medium Frequency, or High Frequency bar code. Low Frequency (02h) Medium Frequency (Optimum Setting) (01h) High Frequency (00h)
User Preferences 4-7 Beeper Volume Parameter # 8Ch To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume bar code. Low Volume (02h) Medium Volume (01h) High Volume (00h) Power Mode Parameter # 80h This parameter determines whether or not power remains on after a decode attempt. In reduced power mode, the digital scanner enters into a low power consumption mode to preserve battery life after each decode attempt.
Symbol DS6607 Product Reference Guide Time Delay to Low Power Mode Parameter # 92h This parameter only applies when Power Mode is set to Reduced Power. Note This parameter sets the time the digital scanner remains active after decoding. The digital scanner wakes upon trigger pull or when the host attempts to communicate with the digital scanner.
Page 49
User Preferences 4-9 Time Delay to Low Power Mode (continued) 15 Minutes (2Bh) 1 Hour (31h)
4-10 Symbol DS6607 Product Reference Guide Trigger Mode Parameter # 8Ah Select one of the following trigger modes for the digital scanner: • Level - A trigger pull activates decode processing. Decode processing continues until the bar code is decoded, the trigger is released, or the Decode Session Timeout is reached.
User Preferences 4-11 Picklist Mode Parameter # F0h 92h Picklist mode enables the digital scanner to decode only bar codes that are aligned under the laser crosshair. Select one of the following picklist modes for the digital scanner: • Disabled Always - Picklist mode is always disabled. •...
4-12 Symbol DS6607 Product Reference Guide Timeout Between Decodes, Same Symbol Parameter # 89h This option is used in hands-free (Intellistand) mode to prevent the beeper from continuously beeping when a symbol is left in the digital scanner’s field of view. It is programmable in 0.1 second increments from 0.0 to 9.9 seconds. The default interval is 0.6 seconds.
Imaging Preferences 5-3 Introduction If desired, program the digital scanner to perform various functions, or activate different features. This chapter describes imaging preference features and provides the programming bar codes for selecting these features. The digital scanner ships with the settings shown in the Imaging Preferences Default Table on page 5-4 (also see Appendix A,...
Symbol DS6607 Product Reference Guide Imaging Preferences Parameter Defaults Table 5-1 lists the defaults for imaging preferences parameters. There are two ways to change the default values: • Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the...
Symbol DS6607 Product Reference Guide Imaging Preferences The parameters in this chapter control image capture characteristics. Image capture occurs in all modes of operation, including decode, video, and snapshot. Operational Modes The digital scanner has three modes of operation: • Decode Mode •...
Imaging Preferences 5-7 Decoding Illumination Parameter # F0h, 2Ah Selecting Enable Decoding Illumination causes the digital scanner to flash illumination to aid decoding. Select Disable Decoding Illumination to prevent the digital scanner from using decoding illumination. Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the distance to the target increases.
Symbol DS6607 Product Reference Guide Image Capture Autoexposure Parameter # F0h, 68h Select Enable Image Capture Autoexposure to allow the digital scanner to control gain settings and exposure (integration) time to best capture an image for the selected operation mode.
Imaging Preferences 5-9 Gain Parameter # F4h, F0h, A7h This parameter only applies when Decoding or Image Capture Autoexposure is disabled. Gain is a means of amplifying the raw image data before it is converted into 256 grayscale values. Increasing the gain increases brightness and contrast, but also increases noise (undesired electrical fluctuations in the image) which makes the image less attractive and/or harder to decode.
5-10 Symbol DS6607 Product Reference Guide Exposure Time (continued) 25 ms (018Ah) 30 ms (01D8h) Snapshot Mode Timeout Parameter # F0h, 43h This parameter sets the amount of time the digital scanner remains in Snapshot Mode. The digital scanner exits Snapshot Mode when you pull the trigger, or when the Snapshot Mode Timeout elapses.
Imaging Preferences 5-11 Image Cropping Parameter # F0h, 2Dh This parameter crops a captured image. Select Disable Image Cropping to present the full 640 x 480 pixels. Select Enable Image Cropping to crop the image to the pixel addresses set in Crop to Pixel Addresses on page 5-12.
Imaging Preferences 5-13 Image Resolution Parameter # F0h, 2Eh This option alters image resolution before compression. Multiple pixels are combined to one pixel, resulting in a smaller image containing the original content with reduced resolution. Select one of the following values: Resolution Value Uncropped Image Size Full...
5-14 Symbol DS6607 Product Reference Guide JPEG Image Options Parameter # F0h, 2Bh JPEG images can be optimized for either size or for quality. Scan the JPEG Quality Selector bar code to enter a quality value; the digital scanner then selects the corresponding image size. Scan the JPEG Size Selector bar code to enter a size value; the digital scanner then selects the best image quality.
Imaging Preferences 5-15 Image File Format Selector Parameter # F0h, 30h Select an image format appropriate for the system (BMP, TIFF, or JPEG). The digital scanner stores captured images in the selected format. BMP File Format (03h) JPEG File Format (01h) TIFF File Format (04h)
5-16 Symbol DS6607 Product Reference Guide Bits Per Pixel Parameter # F0h, 2Fh Select the number of significant bits per pixel (BPP) to use when capturing an image. Select 1 BPP for a black and white image, 4 BPP to assign 1 of 16 levels of grey to each pixel, or 8 BPP to assign 1 of 256 levels of grey to each pixel. The digital scanner ignores these settings for JPEG files, which always use 8 BPP.
Imaging Preferences 5-17 Signature Capture Parameter # 5Dh A signature capture bar code is a special-purpose symbology which delineates a signature capture area in a document with a machine-readable format. The recognition pattern is variable so it can optionally provide an index to various signatures. The region inside the bar code pattern is considered the signature capture area.
5-18 Symbol DS6607 Product Reference Guide Signature Capture File Format Selector Parameter # F0h, 39h Select a signature file format appropriate for the system (BMP, TIFF, or JPEG). The digital scanner stores captured signatures in the selected format. BMP Signature Format...
Imaging Preferences 5-19 Signature Capture Bits Per Pixel Parameter # F0h, 3Ah Select the number of significant bits per pixel (BPP) to use when capturing a signature. Select 1 BPP for a black and white image, 4 BPP to assign 1 of 16 levels of grey to each pixel, or 8 BPP to assign 1 of 256 levels of grey to each pixel. The digital scanner ignores these settings for JPEG files, which always use 8 BPP.
5-20 Symbol DS6607 Product Reference Guide Signature Capture Height Parameter # F4h, F0h, 6Fh To set the height of the signature capture box, scan the Signature Capture Height bar code, followed by 3 bar codes from Appendix D, Numeric Bar Codes corresponding to a value in the range of 001 to 480 decimal.
Imaging Preferences 5-21 Target Video Frame Size Parameter # F0h, 48h Select the number of 100-byte blocks to be transmitted per second. Selecting a smaller value allows more frames to be transmitted per second but reduces video quality; selecting a larger value increases video quality but slows transmission. To set the Target Video Frame Size, scan the bar code below followed by two bar codes from Appendix D, Numeric Bar Codes corresponding to the 100-byte value from 800 to 3300 bytes.
Page 74
5-22 Symbol DS6607 Product Reference Guide...
Page 75
SSI Interface Introduction ................6-3 Connecting Using Simple Serial Interface .
SSI Interface 6-3 Introduction This chapter describes how to set up the digital scanner with a Simple Serial Interface (SSI) host. When using SSI, program the digital scanner via bar code menu or SSI host commands. Throughout the programming bar code menus, default values are indicated with asterisks ( Baud Rate 9600 Indicates Default Feature/Option...
Symbol DS6607 Product Reference Guide Simple Serial Interface Default Parameters Table 6-1 lists the defaults for the SSI host. There are two ways to change the default values: • Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the...
SSI Interface 6-5 SSI Host Parameters Baud Rate Parameter # 9Ch Baud rate is the number of bits of data transmitted per second. Set the digital scanner's baud rate to match the data rate setting of the host device. Otherwise, data may not reach the host or may reach it in distorted form. To enable the SSI host, scan the appropriate baud rate bar code that matches the baud rate setting of the host device.
SSI Interface 6-7 Parity Parameter # 9Eh A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements. • Select Odd parity and the parity bit has a value 0 or 1, based on data, to ensure that an odd number of 1 bits is contained in the coded character.
Symbol DS6607 Product Reference Guide Check Parity Parameter # 97h Select whether or not to check the parity of received characters. Use the Parity parameter to select the type of parity. Check Parity (01h) Do Not Check Parity (00h) Software Handshaking Parameter # 9Fh This parameter offers control of the data transmission process in addition to that offered by hardware handshaking.
SSI Interface 6-9 Host RTS Line State Parameter # 9Ah This parameter sets the expected idle state of the Serial Host RTS line. The SSI Interface is used with host applications which also implement the SSI protocol. However, the digital scanner can be used in a "scan-and-transmit"...
6-10 Symbol DS6607 Product Reference Guide Stop Bit Select Parameter # 9Dh The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving (host) device for the next character in the serial data stream. Set the number of stop bits (one or two) to match host device requirements.
SSI Interface 6-11 Host Serial Response Time-out Parameter # 9Bh This parameter specifies how long the decoder waits for an ACK or NAK before resending. Also, if the decoder wants to send, and the host has already been granted permission to send, the decoder waits for the designated time-out before declaring an error. To set the delay period (options are 2, 5, 7.5, or 9,9 seconds), scan one of the following bar codes.
6-12 Symbol DS6607 Product Reference Guide Host Character Time-out Parameter # EFh This parameter determines the maximum time the decoder waits between characters transmitted by the host before discarding the received data and declaring an error. To set the delay period (options are 200, 500, 750, or 990 ms), scan one of the following bar codes.
SSI Interface 6-13 Multipacket Option Parameter # F0h, 4Eh This parameter controls ACK/NAK handshaking for multi-packet transmissions. • Multi-Packet Option 1: The host sends an ACK / NAK for each data packet during a multi-packet transmission. • Multi-Packet Option 2: The digital scanner sends data packets continuously, with no ACK/NAK handshaking to pace the transmission.
6-14 Symbol DS6607 Product Reference Guide Interpacket Delay Parameter # F0h, 4Fh This parameter specifies the interpacket delay when Multipacket Option 3 is selected. To set the delay period (options are 0, 25, 50, 75, or 99 ms), scan one of the following bar codes.
SSI Interface 6-15 Event Reporting The host can request the digital scanner to provide certain information (events) relative to the digital scanner’s behavior. Enable or disable the events listed in Table 6-2 and on the following pages by scanning the appropriate bar codes. Table 6-2.
6-16 Symbol DS6607 Product Reference Guide Boot Up Event Parameter # F0h, 02h When enabled, the digital scanner generates a message to the host whenever power is applied. When disabled, no notification is sent. Enable Boot Up Event (01h) Disable Boot Up Event...
7-2, refer to the documentation for the host device to set communication parameters to match the host. The digital scanner uses TTL RS-232 signal levels, which interface with most system architectures. For system architectures requiring RS-232C signal levels, Motorola offers different cables providing Note TTL-to-RS-232C conversion.
Symbol DS6607 Product Reference Guide Connecting an RS-232 Interface This connection is made directly from the digital scanner to the host computer. Interface Cable Serial Port Connector to Host Power Supply Cable Figure 7-1. RS-232 Direct Connection Interface cables vary depending on configuration. The connectors illustrated in Figure 7-1 are examples only.
RS-232 Interface 7-5 RS-232 Parameter Defaults Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s) provided in the RS- 232 Host Parameters section beginning on page 7-6. Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters.
Symbol DS6607 Product Reference Guide RS-232 Host Parameters Various RS-232 hosts are set up with their own parameter default settings (Table 7-2). Selecting standard, ICL, Fujitsu, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, OPOS/JPOS, Olivetti, or Omron sets the defaults listed below.
Page 97
RS-232 Interface 7-7 RS-232 Host Parameters (continued) Selecting ICL, Fujitsu, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, OPOS/JPOS, Olivetti, or Omron enables the transmission of code ID characters listed in Table 7-3. These code ID characters are not programmable and are separate from the Transmit Code ID feature.
Symbol DS6607 Product Reference Guide RS-232 Host Types To select an RS-232 host interface, scan one of the following bar codes. Enable RS-232 (No Variant)* ICL RS-232 Wincor-Nixdorf RS-232 Mode A Wincor-Nixdorf RS-232 Mode B Olivetti ORS4500 Omron *Scanning Enable RS-232 (No Variant) activates the RS-232 driver, but does not change port settings (e.g., parity, data bits,...
RS-232 Interface 7-9 RS-232 Host Types (continued) OPOS/JPOS Fujitsu RS-232 Baud Rate Baud rate is the number of bits of data transmitted per second. Set the digital scanner's baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form. Baud Rate 600 Baud Rate 1200 Baud Rate 2400...
RS-232 Interface 7-11 Parity A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements. • Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an odd number of 1 bits are contained in the coded character.
7-12 Symbol DS6607 Product Reference Guide Data Bits This parameter allows the digital scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol. 7-Bit 8-Bit Check Receive Errors Select whether or not the parity, framing, and overrun of received characters are checked. The parity value of received characters is verified against the parity parameter selected above.
RS-232 Interface 7-13 Hardware Handshaking The data interface consists of an RS-232 port designed to operate either with or without the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). If Standard RTS/CTS handshaking is not selected, scan data is transmitted as it becomes available. If Standard RTS/CTS handshaking is selected, scan data is transmitted according to the following sequence: •...
RS-232 Interface 7-15 Software Handshaking This parameter offers control of the data transmission process in addition to, or instead of, that offered by hardware handshaking. There are five options. If Software Handshaking and Hardware Handshaking are both enabled, Hardware Handshaking takes precedence. •...
7-16 Symbol DS6607 Product Reference Guide Software Handshaking (continued) ACK/NAK with ENQ XON/XOFF Host Serial Response Time-out This parameter specifies how long the digital scanner waits for an ACK, NAK, or CTS before determining that a transmission error has occurred. This only applies when in one of the ACK/NAK Software Handshaking modes, or RTS/CTS Hardware Handshaking option.
RS-232 Interface 7-17 Host Serial Response Time-out (continued) Maximum: 9.9 Sec RTS Line State This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High RTS line state. Host: Low RTS Host: High RTS Beep on <BEL>...
RS-232 Interface 7-19 Nixdorf Beep/LED Options When Nixdorf Mode B is selected, this indicates when the digital scanner should beep and turn on its LED after a decode. Normal Operation (Beep/LED immediately after decode) Beep/LED After Transmission Beep/LED After CTS Pulse Ignore Unknown Characters Unknown characters are characters the host does not recognize.
7-20 Symbol DS6607 Product Reference Guide ASCII Character Set for RS-232 The values in Table 7-4 can be assigned as prefixes or suffixes for ASCII character data transmission. Table 7-4. Prefix/Suffix Values Full ASCII Prefix/Suffix Value Code 39 Encode Character...
USB Interface 8-3 Introduction This chapter describes how to set up the digital scanner with a USB host. The digital scanner connects directly to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required. Throughout the programming bar code menus, default values are indicated with asterisks ( Indicates Default North American Standard USB Keyboard...
Symbol DS6607 Product Reference Guide To set up the digital scanner: Interface cables vary depending on configuration. The connectors illustrated in Figure 8-1 are examples only. The connectors may be different than those illustrated, but the steps to connect the scanner remain the Note same.
Page 119
USB Interface 8-5 Table 8-1. USB Host Default Table (Continued) Parameter Default Page Number Convert Case None 8-14...
Symbol DS6607 Product Reference Guide USB Host Parameters USB Device Type Select the desired USB device type. When changing USB Device Types, the digital scanner automatically resets. The digital scanner issues the standard startup beep sequences. Note HID Keyboard Emulation...
USB Interface 8-7 USB Device Type (continued) Symbol Native API (SNAPI) with Imaging Interface Symbol Native API (SNAPI) without Imaging Interface Symbol Native API (SNAPI) Status Handshaking After selecting a SNAPI interface as the USB device type, select whether to enable or disable status handshaking. Enable SNAPI Status Handshaking Disable SNAPI Status Handshaking...
Symbol DS6607 Product Reference Guide USB Country Keyboard Types (Country Codes) Scan the bar code corresponding to the keyboard type. This setting applies only to the USB HID Keyboard Emulation device. When changing USB country keyboard types the digital scanner automatically resets. The digital scanner issues the standard startup beep sequences.
Page 123
USB Interface 8-9 USB Country Keyboard Types (continued) Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows (ASCII) Portuguese-Brazilian Windows...
8-10 Symbol DS6607 Product Reference Guide USB Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes. Scan a bar code below to increase the delay when hosts require a slower transmission of data. No Delay Medium Delay (20 msec)
USB Interface 8-11 USB Ignore Unknown Characters This option applies only to the HID Keyboard Emulation device and IBM device. Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound.
8-12 Symbol DS6607 Product Reference Guide Emulate Keypad with Leading Zero When enabled, character sequences sent over the numeric keypad are sent as ISO characters which have a leading zero. For example ASCII A would be sent as “ALT MAKE” 0 0 6 5 “ALT BREAK”.
USB Interface 8-13 USB Keyboard FN 1 Substitution This option applies only to the USB HID Keyboard Emulation device. When enabled, this allows replacement of any FN 1 characters in an EAN 128 bar code with a Key Category and value chosen by the user (see FN1 Substitution Values on page 11-8 to set the Key Category and Key Value).
8-14 Symbol DS6607 Product Reference Guide Simulated Caps Lock When enabled, the digital scanner inverts upper and lower case characters on the bar code as if the Caps Lock state is enabled on the keyboard. This inversion is done regardless of the current state of the keyboard’s Caps Lock state.
USB Interface 8-15 ASCII Character Set for USB Table 8-2. USB Prefix/Suffix Values Full ASCII Code 39 Prefix/ Suffix Value Encode Char.acter Keystroke 1000 CTRL 2 1001 CTRL A 1002 CTRL B 1003 CTRL C 1004 CTRL D 1005 CTRL E 1006 CTRL F 1007...
Page 130
8-16 Symbol DS6607 Product Reference Guide Table 8-2. USB Prefix/Suffix Values (Continued) Full ASCII Code 39 Prefix/ Suffix Value Encode Char.acter Keystroke 1030 CTRL 6 1031 CTRL - 1032 Space Space 1033 1034 “ 1035 1036 1037 1038 & 1039 ‘...
Page 133
USB Interface 8-19 Table 8-3. USB ALT Key Character Set ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F 2071 ALT G 2072 ALT H 2073 ALT I 2074...
Page 134
8-20 Symbol DS6607 Product Reference Guide Table 8-4. USB GUI Key Character Set GUI Key Keystroke 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4 3053 GUI 5 3054 GUI 6...
Page 135
USB Interface 8-21 Table 8-4. USB GUI Key Character Set (Continued) GUI Key Keystroke 3087 GUI W 3088 GUI X 3089 GUI Y 3090 GUI Z Note: ™ GUI Shift Keys - The Apple iMac keyboard has an apple key on either side of the space bar.
Page 136
8-22 Symbol DS6607 Product Reference Guide Table 8-6. USB Numeric Keypad Character Set Numeric Keypad Keystroke 6042 6043 6044 undefined 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock...
Page 137
USB Interface 8-23 Table 8-7. USB Extended Keypad Character Set Extended Keypad Keystroke 7001 Break 7002 Delete 7003 PgUp 7004 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace 7009 7010 Print Screen 7011 Insert 7012 Home 7013 Enter 7014 Escape 7015...
Page 138
8-24 Symbol DS6607 Product Reference Guide...
123 Scan 9-3 Introduction ® 123Scan is a Windows -based utility that programs the digital scanner with all parameters including Advanced Data Formatting (ADF) Rules. An ADF rule modifies bar code data before it is sent to the host to ensure compatibility between bar coded data and the host application.
Symbologies 10-5 Introduction This chapter describes symbology features and provides the programming bar codes for selecting these features. Before programming, follow the instructions in Chapter 1, Getting Started. To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and are preserved even when the digital scanner is powered down.
10-6 Symbol DS6607 Product Reference Guide Symbology Parameter Defaults Table 10-1 lists the defaults for all symbologies parameters. There are two ways to change the default values: • Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the...
Page 150
10-8 Symbol DS6607 Product Reference Guide Table 10-1. Symbology Default Table (Continued) Parameter Page Parameter Number Default Number Discrete 2 of 5 (DTF) Discrete 2 of 5 Disable 10-38 Set Length(s) for D 2 of 5 14h 15h 10-38 Codabar (NW - 7)
10-10 Symbol DS6607 Product Reference Guide UPC/EAN Enable/Disable UPC-A Parameter # 01h To enable or disable UPC-A, scan the appropriate bar code below. Enable UPC-A (01h) Disable UPC-A (00h) Enable/Disable UPC-E Parameter # 02h To enable or disable UPC-E, scan the appropriate bar code below.
Symbologies 10-11 Enable/Disable UPC-E1 Parameter # 0Ch UPC-E1 is disabled by default. To enable or disable UPC-E1, scan the appropriate bar code below. UPC-E1 is not a UCC (Uniform Code Council) approved symbology. Note Enable UPC-E1 (01h) Disable UPC-E1 (00h) Enable/Disable EAN-8/JAN-8 Parameter # 04h To enable or disable EAN-8/JAN-8, scan the appropriate bar code below.
Symbologies 10-13 Decode UPC/EAN/JAN Supplementals Parameter # 10h Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). Six options are available. • If Decode UPC/EAN/JAN Only With Supplementals is selected, UPC/EAN/JAN symbols without supplementals are not decoded.
10-14 Symbol DS6607 Product Reference Guide Decode UPC/EAN/JAN Supplementals (continued) Enable 378/379 Supplemental Mode (04h) Enable 978 Supplemental Mode (05h) Enable Smart Supplemental Mode (03h) UPC/EAN/JAN Supplemental Redundancy Parameter # 50h With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a symbol without supplementals is decoded before transmission.
Symbologies 10-15 Transmit UPC-A Check Digit Parameter # 28h The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-A check digit. It is always verified to guarantee the integrity of the data. Transmit UPC-A Check Digit (01h) Do Not Transmit UPC-A Check Digit...
10-16 Symbol DS6607 Product Reference Guide Transmit UPC-E1 Check Digit Parameter # 2Ah The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-E1 check digit. It is always verified to guarantee the integrity of the data.
Symbologies 10-17 UPC-E Preamble Parameter # 23h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0” for USA), and transmit no preamble.
10-18 Symbol DS6607 Product Reference Guide UPC-E1 Preamble Parameter # 24h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E1 preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...
Symbologies 10-19 Convert UPC-E1 to UPC-A Parameter # 26h Enable this to convert UPC-E1 decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). When disabled, UPC-E1 decoded data is transmitted as UPC-E1 data, without conversion. Convert UPC-E1 to UPC-A (Enable) (01h) Do Not Convert UPC-E1 to UPC-A (Disable)
10-20 Symbol DS6607 Product Reference Guide UCC Coupon Extended Code Parameter # 55h When enabled, this parameter decodes UPC-A bar codes starting with digit ‘5’, EAN-13 bar codes starting with digit ‘99’, and UPC- A/EAN-128 Coupon Codes. UPCA, EAN-13, and EAN-128 must be enabled to scan all types of Coupon Codes.
Symbologies 10-21 Enable/Disable UCC/EAN-128 Parameter # 0Eh To enable or disable UCC/EAN-128, scan the appropriate bar code below. Enable UCC/EAN-128 (01h) Disable UCC/EAN-128 (00h) Enable/Disable ISBT 128 Parameter # 54h ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan a bar code below to enable or disable ISBT 128. If necessary, the host must perform concatenation of the ISBT data.
10-22 Symbol DS6607 Product Reference Guide Code 39 Enable/Disable Code 39 Parameter # 00h To enable or disable Code 39, scan the appropriate bar code below. Enable Code 39 (01h) Disable Code 39 (00h) Enable/Disable Trioptic Code 39 Parameter # 0Dh Trioptic Code 39 is a variant of Code 39 used in the marking of computer tape cartridges.
Symbologies 10-23 Convert Code 39 to Code 32 Parameter # 56h Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32. Code 39 must be enabled for this parameter to function.
10-24 Symbol DS6607 Product Reference Guide Set Lengths for Code 39 Parameter # L1 = 12h, L2 = 13h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Symbologies 10-25 Set Lengths for Code 39 (continued) Code 39 - Length Within Range Code 39 - Any Length Code 39 Check Digit Verification Parameter # 30h When this feature is enabled, the digital scanner checks the integrity of all Code 39 symbols to verify that the data complies with specified check digit algorithm.
10-26 Symbol DS6607 Product Reference Guide Transmit Code 39 Check Digit Parameter # 2Bh Scan a bar code below to transmit Code 39 data with or without the check digit. Transmit Code 39 Check Digit (Enable) (01h) Do Not Transmit Code 39 Check Digit (Disable) (00h) Code 39 Check Digit Verification must be enabled for this parameter to function.
Symbologies 10-27 Code 39 Buffering (Scan & Store) Parameter # 71h This feature allows the digital scanner to accumulate data from multiple Code 39 symbols. Selecting the Scan and Store option (Buffer Code 39) temporarily buffers all Code 39 symbols having a leading space as a first character for later transmission.
Page 170
10-28 Symbol DS6607 Product Reference Guide Clear Transmission Buffer To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a dash (minus), and a stop character. • The digital scanner issues a short hi/lo/hi beep.
Symbologies 10-29 Overfilling Transmission Buffer The Code 39 buffer holds 200 characters. If the symbol just read results in an overflow of the transmission buffer: • The digital scanner indicates that the symbol was rejected by issuing three long, high beeps. •...
10-30 Symbol DS6607 Product Reference Guide Set Lengths for Code 93 Parameter # L1 = 1Ah, L2 = 1Bh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
10-32 Symbol DS6607 Product Reference Guide Set Lengths for Code 11 Parameter # L1 = 1Ch, L2 = 1Dh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Symbologies 10-33 Code 11 Check Digit Verification Parameter # 34h This feature allows the digital scanner to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm. This selects the check digit mechanism for the decoded Code 11 bar code. The options are to check for one check digit, check for two check digits, or disable the feature.
10-34 Symbol DS6607 Product Reference Guide Transmit Code 11 Check Digits Parameter # 2Fh This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable) (01h) Do Not Transmit Code 11 Check Digit(s) (Disable) (00h) Code 11 Check Digit Verification must be enabled for this parameter to function.
Symbologies 10-35 Set Lengths for Interleaved 2 of 5 Parameter # L1 = 16h, L2 = 17h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range. •...
10-36 Symbol DS6607 Product Reference Guide Set Lengths for Interleaved 2 of 5 (continued) I 2 of 5 - Length Within Range I 2 of 5 - Any Length I 2 of 5 Check Digit Verification Parameter # 31h When this feature is enabled, the digital scanner checks the integrity of all I 2 of 5 symbols to verify the data complies with either the specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm.
Symbologies 10-37 Transmit I 2 of 5 Check Digit Parameter # 2Ch Scan the appropriate bar code below to transmit I 2 of 5 data with or without the check digit. Transmit I 2 of 5 Check Digit (Enable) (01h) Do Not Transmit I 2 of 5 Check Digit (Disable) (00h) Convert I 2 of 5 to EAN-13...
10-38 Symbol DS6607 Product Reference Guide Discrete 2 of 5 (DTF) Enable/Disable Discrete 2 of 5 Parameter # 05h To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5 (01h) Disable Discrete 2 of 5...
Symbologies 10-39 Set Lengths for Discrete 2 of 5 (continued) D 2 of 5 - One Discrete Length D 2 of 5 - Two Discrete Lengths D 2 of 5 - Length Within Range D 2 of 5 - Any Length Codabar (NW - 7) Enable/Disable Codabar Parameter # 07h...
10-40 Symbol DS6607 Product Reference Guide Set Lengths for Codabar Parameter # L1 = 18h, L2 = 19h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific range.
Symbologies 10-41 CLSI Editing Parameter # 36h When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system requires this data format. Symbol length does not include start and stop characters.
10-42 Symbol DS6607 Product Reference Guide Enable/Disable MSI Parameter # 0Bh To enable or disable MSI, scan the appropriate bar code below. Enable MSI (01h) Disable MSI (00h) Set Lengths for MSI Parameter # L1 = 1Eh, L2 = 1Fh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Symbologies 10-43 Set Lengths for MSI (continued) MSI - One Discrete Length MSI - Two Discrete Lengths MSI - Length Within Range MSI - Any Length MSI Check Digits Parameter # 32h With MSI symbols, one check digit is mandatory and always verified by the reader. The second check digit is optional. If the MSI codes include two check digits, scan the Two MSI Check Digits bar code to enable verification of the second check digit.
10-44 Symbol DS6607 Product Reference Guide Transmit MSI Check Digit(s) Parameter # 2Eh Scan a bar code below to transmit MSI data with or without the check digit. Transmit MSI Check Digit(s) (Enable) (01h Do Not Transmit MSI Check Digit(s) (Disable)
Symbologies 10-45 Postal Codes US Postnet Parameter # 59h To enable or disable US Postnet, scan the appropriate bar code below. Enable US Postnet (01h) Disable US Postnet (00h) US Planet Parameter # 5Ah To enable or disable US Planet, scan the appropriate bar code below. Enable US Planet (01h) Disable US Planet...
10-46 Symbol DS6607 Product Reference Guide UK Postal Parameter # 5Bh To enable or disable UK Postal, scan the appropriate bar code below. Enable UK Postal (01h) Disable UK Postal (00h) Transmit UK Postal Check Digit Parameter # 60h Select whether to transmit UK Postal data with or without the check digit.
Symbologies 10-47 Japan Postal Parameter # F0h, 22h To enable or disable Japan Postal, scan the appropriate bar code below. Enable Japan Postal (01h) Disable Japan Postal (00h) Australian Postal Parameter # F0h, 23h To enable or disable Australian Postal, scan the appropriate bar code below. Enable Australian Postal (01h) Disable Australian Postal...
10-48 Symbol DS6607 Product Reference Guide Dutch Postal Parameter # F0h, 46h To enable or disable Dutch Postal, scan the appropriate bar code below. Enable Dutch Postal (01h) Disable Dutch Postal (00h) Transmit US Postal Check Digit Parameter # 5Fh Select whether to transmit US Postal data with or without the check digit.
Symbologies 10-49 GS1 DataBar The variants of GS1 DataBar are GS1 DataBar-14, GS1 DataBar Expanded, and GS1 DataBar Limited. The limited and expanded versions have stacked variants. Scan the appropriate bar code below to enable or disable each variant of GS1 DataBar. GS1 DataBar-14 Parameter # F0h 52h Enable GS1 DataBar-14...
10-50 Symbol DS6607 Product Reference Guide GS1 DataBar Expanded Parameter # F0h 54h Enable GS1 DataBar Expanded (01h) Disable GS1 DataBar Expanded (00h) Convert GS1 DataBar to UPC/EAN Parameter # F0h, 8Dh This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a Composite symbol. Enable this to strip the leading '010' from GS1 DataBar-14 and GS1 DataBar Limited symbols encoding a single zero as the first digit, and report the bar code as EAN-13.
Symbologies 10-51 Composite Composite CC-C Parameter # F0h 55h Scan a bar code below to enable or disable Composite bar codes of type CC-C. Enable CC-C (01h) Disable CC-C (00h) Composite CC-A/B Parameter # F0h 56h Scan a bar code below to enable or disable Composite bar codes of type CC-A/B. Enable CC-A/B (01h) Disable CC-A/B...
10-52 Symbol DS6607 Product Reference Guide Composite TLC-39 Parameter # F0h 73h Scan a bar code below to enable or disable Composite bar codes of type TLC-39. Enable TLC39 (01h) Disable TLC39 (00h)
Symbologies 10-53 UPC Composite Mode Parameter # F0h 58h UPC symbols can be “linked” with a 2D symbol during transmission as if they were one symbol. There are three options for these symbols: • Select UPC Never Linked to transmit UPC bar codes regardless of whether a 2D symbol is detected. •...
10-54 Symbol DS6607 Product Reference Guide Composite Beep Mode Parameter # F0h, 8Eh To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code. Single Beep after both are decoded (00h) Beep as each code type is decoded...
10-56 Symbol DS6607 Product Reference Guide Code 128 Emulation Parameter # 7Bh When this parameter is enabled, the scanner transmits data from certain MicroPDF417 symbols as if it was encoded in Code 128 symbols. Transmit AIM Symbology Identifiers must be enabled for this parameter to work.
Symbologies 10-57 Data Matrix Parameter # F0h, 24h To enable or disable Data Matrix, scan the appropriate bar code below. Enable Data Matrix (01h) Disable Data Matrix (00h) Maxicode Parameter # F0h, 26h To enable or disable Maxicode, scan the appropriate bar code below. Enable Maxicode (01h) Disable Maxicode...
10-58 Symbol DS6607 Product Reference Guide QR Code Parameter # F0h,25h To enable or disable QR Code, scan the appropriate bar code below. Enable QR Code (01h) Disable QR Code (00h)
Symbologies 10-59 Redundancy Level Parameter # 4Eh The digital scanner offers four levels of decode redundancy. Select higher redundancy levels for decreasing levels of bar code quality. As redundancy levels increase, the digital scanner’s aggressiveness decreases. Select the redundancy level appropriate for the bar code quality. Redundancy Level 1 The following code types must be successfully read twice before being decoded: Code Type...
Symbologies 10-61 Security Level Parameter # 4Dh The digital scanner offers four levels of decode security for delta bar codes, which include the Code 128 family, UPC/EAN, and Code 93. Select increasing levels of security for decreasing levels of bar code quality. There is an inverse relationship between security and digital scanner aggressiveness, so choose only that level of security necessary for any given application.
10-62 Symbol DS6607 Product Reference Guide Intercharacter Gap Size Parameter # F0h, 7Dh The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various bar code-printing technologies, this gap can grow larger than the maximum size allowed, preventing the digital scanner from decoding the symbol. If this problem occurs, scan the Large Intercharacter Gaps parameter to tolerate these out-of-specification bar codes.
Symbologies 10-63 Macro PDF Features Macro PDF is a special feature for concatenating multiple PDF symbols into one file. The digital scanner can decode symbols that are encoded with this feature, and can store more than 64 kb of decoded data stored in up to 50 MacroPDF symbols. When printing, keep each Macro PDF sequence separate, as each sequence has unique identifiers.
Page 206
10-64 Symbol DS6607 Product Reference Guide...
Miscellaneous Scanner Options 11-3 Introduction This chapter includes commonly used bar codes to customize how data is transmitted to the host device. See Chapter 12, Advanced Data Formatting for further customization options. To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and are preserved even when the digital scanner is powered down.
11-4 Symbol DS6607 Product Reference Guide Miscellaneous Scanner Parameter Defaults Table 11-1 lists the defaults for miscellaneous scanner options parameters. There are two ways to change the default values: • Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the...
Miscellaneous Scanner Options 11-5 Miscellaneous Scanner Parameters Transmit Code ID Character Parameter # 2Dh A Code ID character identifies the code type of a scanned bar code. This is useful when the digital scanner is decoding more than one code type. In addition to any single character prefix already selected, the Code ID character is inserted between the prefix and the decoded symbol.
11-6 Symbol DS6607 Product Reference Guide Prefix/Suffix Values Key Category Parameter # P = 63h, S1 = 62h, S2 = 64h Decimal Value Parameter # P = 69h, S1 = 68h, S2 = 6Ah A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set a value for a prefix or suffix, scan a four-digit number (i.e., four bar codes from...
Miscellaneous Scanner Options 11-7 Scan Data Transmission Format Parameter # EBh To change the scan data format, scan one of the following eight bar codes corresponding to the desired format. If using this parameter do not use ADF rules to set the prefix/suffix. Note To set values for the prefix and/or suffix, see Prefix/Suffix Values on page...
Miscellaneous Scanner Options 11-9 Transmit “No Read” Message Parameter # 5Eh Scan a bar code below to select whether or not to transmit a No Read message. When enabled, the characters NR are transmitted when a bar code is not decoded. When disabled, if a symbol does not decode, nothing is sent to the host. Enable No Read (01h) Disable No Read...
Page 216
11-10 Symbol DS6607 Product Reference Guide...
Page 217
Advanced Data Formatting Introduction ................12-3 Rules: Criteria Linked to Actions .
Page 218
12-2 Symbol DS6607 Product Reference Guide Beeps ................12-46 Send Keystroke (Control Characters and Keyboard Characters) .
Advanced Data Formatting 12-3 Introduction Advanced Data Formatting (ADF) is a means of customizing data before transmission to the host device. Scan data can be edited to suit particular requirements. ADF can be implemented through scanning a related series of bar codes, which begin on page 12-8, or by installing the 123Scan utility (see Chapter 9, 123 Scan) which allows the digital scanner to be setup and programmed with Advanced Data Formatting (ADF) Rules.
12-4 Symbol DS6607 Product Reference Guide Using ADF Bar Codes When programming a rule, make sure the rule is logically correct. Plan ahead before scanning. To program each data formatting rule: • Start the Rule. Scan the Begin New Rule bar code on page 12-8.
Advanced Data Formatting 12-5 Rule 1: The Code 128 Scanning Rule Step Bar Code On Page Beep Indication Begin New Rule 12-8 High High Code 128 12-11 High High Send next 5 characters 12-28 High High Send <CTRL M> 12-48 High High Send next 5 characters 12-28...
12-6 Symbol DS6607 Product Reference Guide and the cashier will key the price manually. To implement this, first enter an ADF rule that applies to the normal situation, such as: Scan Rule Belongs to Set 1. When scanning a bar code of length 15, send the next 2 characters, send the class key, send the next 8 characters, send the stock key, send the data that remains, send the Enter key.
Advanced Data Formatting 12-7 These rules reside in the same “rule list” as ADF Rules, so the order of their creation is also important. Default Rules Every unit has a default rule to send all scan data. Units with custom software may have one or more default rules burned in. The rules hierarchy checks user programmable rules first, then the default rules.
12-8 Symbol DS6607 Product Reference Guide Special Commands Pause Duration This parameter along with the Send Pause parameter on page 12-31 allows a pause to be inserted in the data transmission. Pauses are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar codes “0”...
Advanced Data Formatting 12-9 Erase Use these bar codes to erase criteria, actions, or rules. Erase Criteria And Start Again Erase Actions And Start Again Erase Previously Saved Rule Erase All Rules Quit Entering Rules Scan this bar code to quit entering rules. Quit Entering Rules...
12-10 Symbol DS6607 Product Reference Guide Disable Rule Set Use these bar codes to disable rule sets. Disable Rule Set 1 Disable Rule Set 2 Disable Rule Set 3 Disable Rule Set 4 Disable All Rule Sets...
Advanced Data Formatting 12-11 Criteria Code Types Select any number of code types to be affected. All selected codes must be scanned in succession, prior to selecting other criteria. To select all code types, do not scan any code type. Scan the bar codes for all code types desired before selecting other criteria.
Page 228
12-12 Symbol DS6607 Product Reference Guide Code Types (continued) IATA 2 OF 5 I 2 OF 5 Code 93 UPC-A UPC-E EAN-8 EAN-13...
Page 230
12-14 Symbol DS6607 Product Reference Guide Code Types (continued) ISBT 128 Coupon Code US Postnet US Planet UK Postal Japan Postal Australian Postal...
Page 231
Advanced Data Formatting 12-15 Code Types (continued) Dutch Postal PDF417 MicroPDF Macro PDF Macro MicroPDF MaxiCode Datamatrix...
Page 232
12-16 Symbol DS6607 Product Reference Guide Code Types (continued) QR Code TLC 39 UPC/EAN Composites GS1 DataBar and EAN128 Composites When selecting composite bar codes, enable AIM IDs if parsing UPC or EAN composite data, or data from an application that uses symbol separators.
Advanced Data Formatting 12-17 Code Lengths Define the number of characters the selected code type must contain. Do not select any code length to select code types of any length. Scan these bar codes to define the number of characters the selected code types must contain. Select one length per rule only. 1 Character 2 Characters 3 Characters...
12-22 Symbol DS6607 Product Reference Guide Message Containing A Specific Data String Use this feature to select whether the formatting affects data that begins with a specific character or data string, or contains a specific character or data string. There are 4 features: •...
Page 239
Advanced Data Formatting 12-23 Specific String, Any Location Scan this bar code, then, using the Numeric Keypad on page 12-24, scan a two-digit number representing the position (use a leading “zero” if necessary). Then scan the desired character or characters (up to a total of 8) on the Alphanumeric Keyboard on page 12-90, followed by the...
Page 240
12-24 Symbol DS6607 Product Reference Guide Numeric Keypad Bar codes on this page should not be confused with those on the alphanumeric keyboard.
Page 241
Advanced Data Formatting 12-25 Numeric Keypad (continued) Cancel...
Page 242
12-26 Symbol DS6607 Product Reference Guide Rule Belongs To Set Select the set a rule belongs to. (There are four possible rule sets.) See Alternate Rule Sets on page 12-5 for more information about rule sets. Scan a bar code below to select which set a rule belongs to.
Advanced Data Formatting 12-27 Actions Select how to format the data for transmission. Send Data Send all data that remains, send all data up to a specific character selected from the Alphanumeric Keyboard on page 12-90, or send the next N characters. N = any number from 1 to 254, selected from the Alphanumeric Keyboard.
Page 244
12-28 Symbol DS6607 Product Reference Guide Send Data (continued) Send Next 5 Characters Send Next 6 Characters Send Next 7 Characters Send Next 8 Characters Send Next 9 Characters Send Next 10 Characters Send Next 11 Characters...
Page 245
Advanced Data Formatting 12-29 Send Data (continued) Send Next 12 Characters Send Next 13 Characters Send Next 14 Characters Send Next 15 Characters Send Next 16 Characters Send Next 17 Characters Send Next 18 Characters...
12-30 Symbol DS6607 Product Reference Guide Send Data (continued) Send Next 19 Characters Send Next 20 Characters Setup Field(s) Table 12-1. Setup Field(s) Definitions Parameter Description Page Move Cursor Scan the Move Cursor To Character bar code on page 12-31,...
Page 247
Advanced Data Formatting 12-31 Move Cursor Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning a bar code from the Alphanumeric Keyboard beginning on page 12-90. If there is no match when the rule is interpreted and the rule fails, the next rule is checked. Move Cursor To Character Move Cursor To Start Move Cursor Past Character...
Advanced Data Formatting 12-33 Skip Ahead (continued) Skip Ahead 8 Characters Skip Ahead 9 Characters Skip Ahead 10 Characters Skip Back Use the following bar codes to skip back characters. Skip Back 1 Character Skip Back 2 Characters Skip Back 3 Characters...
Page 250
12-34 Symbol DS6607 Product Reference Guide Skip Back (continued) Skip Back 4 Characters Skip Back 5 Characters Skip Back 6 Characters Skip Back 7 Characters Skip Back 8 Characters Skip Back 9 Characters Skip Back 10 Characters...
Page 251
Advanced Data Formatting 12-35 Send Preset Value Use these bar codes to send preset values. These values must be set using the Scan Prefix and Scan Suffix bar codes on page 11-6. Send Prefix Send Suffix...
12-36 Symbol DS6607 Product Reference Guide Modify Data Modify data in the ways listed. The following actions work for all send commands that follow it within a rule. Programming pad zeros to length 6, send next 3 characters, stop padding, send next 5 characters, adds three zeros to the first send, and the next send is unaffected by the padding.
Advanced Data Formatting 12-37 Pad Data with Spaces To pad data to the left, scan the bar code containing the desired number of spaces. This parameter is activated by Send commands. Pad Spaces To Length 1 Pad Spaces To Length 2 Pad Spaces To Length 3 Pad Spaces To Length 4 Pad Spaces To Length 5...
Page 254
12-38 Symbol DS6607 Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 8 Pad Spaces To Length 9 Pad Spaces To Length 10 Pad Spaces To Length 11 Pad Spaces To Length 12 Pad Spaces To Length 13...
Page 255
Advanced Data Formatting 12-39 Pad Data with Spaces (continued) Pad Spaces To Length 15 Pad Spaces To Length 16 Pad Spaces To Length 17 Pad Spaces To Length 18 Pad Spaces To Length 19 Pad Spaces To Length 20 Pad Spaces To Length 21...
Page 256
12-40 Symbol DS6607 Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 22 Pad Spaces To Length 23 Pad Spaces To Length 24 Pad Spaces To Length 25 Pad Spaces To Length 26 Pad Spaces To Length 27...
Advanced Data Formatting 12-41 Pad Data with Spaces (continued) Pad Spaces To Length 29 Pad Spaces To Length 30 Stop Pad Spaces Pad Data with Zeros To pad data to the left, scan the bar code containing the desired number of zeros. This parameter is activated by Send commands. Pad Zeros To Length 1 Pad Zeros To Length 2 Pad Zeros To Length 3...
Page 258
12-42 Symbol DS6607 Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 4 Pad Zeros To Length 5 Pad Zeros To Length 6 Pad Zeros To Length 7 Pad Zeros To Length 8 Pad Zeros To Length 9...
Page 259
Advanced Data Formatting 12-43 Pad Data with Zeros (continued) Pad Zeros To Length 11 Pad Zeros To Length 12 Pad Zeros To Length 13 Pad Zeros To Length 14 Pad Zeros To Length 15 Pad Zeros To Length 16 Pad Zeros To Length 17...
Page 260
12-44 Symbol DS6607 Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 18 Pad Zeros To Length 19 Pad Zeros To Length 20 Pad Zeros To Length 21 Pad Zeros To Length 22 Pad Zeros To Length 23...
Page 261
Advanced Data Formatting 12-45 Pad Data with Zeros (continued) Pad Zeros To Length 25 Pad Zeros To Length 26 Pad Zeros To Length 27 Pad Zeros To Length 28 Pad Zeros To Length 29 Pad Zeros To Length 30 Stop Pad Zeros...
12-46 Symbol DS6607 Product Reference Guide Beeps Select a beep sequence for each ADF rule. Beep Once Beep Twice Beep Three Times Send Keystroke (Control Characters and Keyboard Characters) Control Characters Scan the “Send __” bar code for the keystroke to send...
Page 263
Advanced Data Formatting 12-47 Control Characters (continued) Send Control C Send Control D Send Control E Send Control F Send Control G Send Control H Send Control I...
Page 264
12-48 Symbol DS6607 Product Reference Guide Control Characters (continued) Send Control J Send Control K Send Control L Send Control M Send Control N Send Control O Send Control P...
Page 265
Advanced Data Formatting 12-49 Control Characters (continued) Send Control Q Send Control R Send Control S Send Control T Send Control U Send Control V Send Control W...
Page 266
12-50 Symbol DS6607 Product Reference Guide Control Characters (continued) Send Control X Send Control Y Send Control Z Send Control [ Send Control \ Send Control ]...
Page 267
Advanced Data Formatting 12-51 Control Characters (continued) Send Control 6 Send Control - Keyboard Characters Scan the “Send __” bar code for the keyboard characters to send. Send Space Send ! Send “ Send #...
Page 277
Advanced Data Formatting 12-61 Keyboard Characters (continued) Send c Send d Send e Send f Send g Send h Send i...
Page 278
12-62 Symbol DS6607 Product Reference Guide Keyboard Characters (continued) Send j Send k Send l Send m Send n Send o Send p...
Page 279
Advanced Data Formatting 12-63 Keyboard Characters (continued) Send q Send r Send s Send t Send u Send v Send w...
Page 280
12-64 Symbol DS6607 Product Reference Guide Keyboard Characters (continued) Send x Send y Send z Send { Send | Send } Send ~...
Page 281
Advanced Data Formatting 12-65 Send ALT Characters Send Alt 2 Send Alt A Send Alt B Send Alt C Send Alt D Send Alt E Send Alt F...
Page 282
12-66 Symbol DS6607 Product Reference Guide Send ALT Characters (continued) Send Alt G Send Alt H Send Alt I Send Alt J Send Alt K Send Alt L Send Alt M...
Page 283
Advanced Data Formatting 12-67 Send ALT Characters (continued) Send Alt N Send Alt O Send Alt P Send Alt Q Send Alt R Send Alt S Send Alt T...
Page 284
12-68 Symbol DS6607 Product Reference Guide Send ALT Characters (continued) Send Alt U Send Alt V Send Alt W Send Alt X Send Alt Y Send Alt Z Send Alt [...
Page 285
Advanced Data Formatting 12-69 Send ALT Characters (continued) Send Alt \ Send Alt ] Send Alt 6 Send Alt -...
12-82 Symbol DS6607 Product Reference Guide Send Function Key (continued) Send PF26 Key Send PF27 Key Send PF28 Key Send PF29 Key Send PF30 Key Send Right Control Key The “Send Right Control Key” action will send a tap (press and release) of the Right Control Key.
Advanced Data Formatting 12-83 Send Graphic User Interface (GUI) Characters The “Send Graphic User Interface Character” actions will tap the specified key while holding the System Dependent Graphic User Interface (GUI) Key. The definition of the Graphic User Interface key is dependant upon the attached system: Send GUI 0 Send GUI 1 Send GUI 2...
Page 300
12-84 Symbol DS6607 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI 6 Send GUI 7 Send GUI 8 Send GUI 9 Send GUI A Send GUI B Send GUI C...
Page 301
Advanced Data Formatting 12-85 Send Graphic User Interface (GUI) Characters (continued) Send GUI D Send GUI E Send GUI F Send GUI G Send GUI H Send GUI I Send GUI J...
Page 302
12-86 Symbol DS6607 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI K Send GUI L Send GUI M Send GUI N Send GUI O Send GUI P Send GUI Q...
Page 303
Advanced Data Formatting 12-87 Send Graphic User Interface (GUI) Characters (continued) Send GUI R Send GUI S Send GUI T Send GUI U Send GUI V Send GUI W Send GUI X...
12-88 Symbol DS6607 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI Y Send GUI Z Turn On/Off Rule Sets Use these bar codes to turn rule sets on and off. Turn On Rule Set 1 Turn On Rule Set 2...
Page 305
Advanced Data Formatting 12-89 Turn On/Off Rule Sets (continued) Use these bar codes to turn rule sets on and off. Turn Off Rule Set 1 Turn Off Rule Set 2 Turn Off Rule Set 3 Turn Off Rule Set 4...
Page 309
Advanced Data Formatting 12-93 Alphanumeric Keyboard (continued) (Underscore)
Page 310
12-94 Symbol DS6607 Product Reference Guide Alphanumeric Keyboard (continued) Numeric bar codes below should not be confused with those on the numeric keypad.
Page 311
Advanced Data Formatting 12-95 Alphanumeric Keyboard (continued)
Page 323
Standard Default Parameters Table A-1. Standard Default Parameters Table Parameter Page Parameter Number Default Number User Preferences Set Default Parameter All Defaults Parameter Scanning Enable Beeper Tone Medium Beeper Volume High Power Mode Continuous On Time Delay to Low Power Mode 1 Minute Trigger Mode Auto Aim...
Page 324
Symbol DS6607 Product Reference Guide Table A-1. Standard Default Parameters Table (Continued) Parameter Page Parameter Number Default Number JPEG Image Options F0h 2Bh Quality 5-14 JPEG Quality Value F0h 31h 5-14 JPEG Size Value F0h 33h 40 (41K) 5-14 Image File Format Selection...
Page 325
Standard Default Parameters Table A-1. Standard Default Parameters Table (Continued) Parameter Page Parameter Number Default Number Event Reporting Decode Event F0h 00h Disable Boot Up Event F0h 02h Disable Parameter Event F0h 03h Disable RS-232 Host Parameters RS-232 Host Types Standard Baud Rate 9600...
Page 326
Symbol DS6607 Product Reference Guide Table A-1. Standard Default Parameters Table (Continued) Parameter Page Parameter Number Default Number Emulate Keypad with Leading Zero Disable 8-12 USB Keyboard FN1 Substitution Disable 8-13 Function Key Mapping Disable 8-13 Simulated Caps Lock Disable...
Page 328
Symbol DS6607 Product Reference Guide Table A-1. Standard Default Parameters Table (Continued) Parameter Page Parameter Number Default Number Discrete 2 of 5 (DTF) Discrete 2 of 5 Disable 10-38 Set Length(s) for D 2 of 5 14h 15h 10-38 Codabar (NW - 7)
Page 329
Standard Default Parameters Table A-1. Standard Default Parameters Table (Continued) Parameter Page Parameter Number Default Number Convert GS1 DataBar to UPC/EAN F0h 8Dh Disable 10-50 Composite Composite CC-C F0h 55h Disable 10-51 Composite CC-A/B F0h 56h Disable 10-51 Composite TLC-39 F0h 73h Disable 10-52...
Page 330
A-10 Symbol DS6607 Product Reference Guide Table A-1. Standard Default Parameters Table (Continued) Parameter Page Parameter Number Default Number Suffix 1 Value 62h, 68h 7013 <CR><LF> 11-6 Suffix 2 Value 64h, 6Ah Scan Data Transmission Format Data as is 11-7...
Symbol DS6607 Product Reference Guide AIM Code Identifiers Each AIM Code Identifier contains the three-character string ]cm where: Flag Character (ASCII 93) Code Character (see Table B-2) Modifier Character (see Table B-3) Table B-2. Aim Code Characters Code Character Code Type...
Programming Reference The modifier character is the sum of the applicable option values based on Table B-3. Table B-3. Modifier Characters Code Type Option Value Option No check character or Full ASCII processing. Reader has checked one check character. Reader has checked and stripped check character. Code 39 Reader has performed Full ASCII character conversion.
Page 338
Symbol DS6607 Product Reference Guide Table B-3. Modifier Characters (Continued) Code Type Option Value Option Standard packet in full EAN country code format, which is 13 digits for UPC-A, UPC-E, and EAN-13 (not including supplemental data). Two-digit supplement data only.
Page 339
Programming Reference Table B-3. Modifier Characters (Continued) Code Type Option Value Option ECC 000-140, not supported. ECC 200. ECC 200, FNC1 in first or fifth position. Data Matrix ECC 200, FNC1 in second or sixth position. ECC 200, ECI protocol implemented. ECC 200, FNC1 in first or fifth position, ECI protocol implemented.
Symbol DS6607 Product Reference Guide Interleaved 2 of 5 12345678901231 GS1 DataBar-14 GS1 DataBar-14 must be enabled to read the bar code below (see GS1 DataBar-14 on page 10-49). Note 7612341562341 PDF417 Data Matrix...
Symbol DS6607 Product Reference Guide Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). Cancel To correct an error or change a selection, scan the bar code below. Cancel...
Page 351
ASCII Character Sets Table E-1. ASCII Value Table Full ASCII Code 39 ASCII Value Encode Char Keystroke 1000 CTRL 2 1001 CTRL A 1002 CTRL B 1003 CTRL C 1004 CTRL D 1005 CTRL E 1006 CTRL F 1007 CTRL G 1008 CTRL H/BACKSPACE 1009...
Page 352
Symbol DS6607 Product Reference Guide Table E-1. ASCII Value Table (Continued) Full ASCII Code 39 ASCII Value Encode Char Keystroke 1012 CTRL L 1013 CTRL M/ENTER 1014 CTRL N 1015 CTRL O 1016 CTRL P 1017 CTRL Q 1018 CTRL R...
Page 356
Symbol DS6607 Product Reference Guide Table E-1. ASCII Value Table (Continued) Full ASCII Code 39 ASCII Value Encode Char Keystroke 1120 1121 1122 1123 1124 1125 1126 The keystroke in bold is sent only if the Function Key Mapping is enabled. Otherwise, the unbold keystroke is sent.
Page 357
ASCII Character Sets E-7 Table E-2. ALT Key Standard Default Tables ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F 2071 ALT G 2072 ALT H 2073 ALT I 2074...
Page 358
Symbol DS6607 Product Reference Guide Table 5-3. USB GUI Key Character Set GUI Key Keystroke 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4 3053 GUI 5 3054 GUI 6...
Page 359
ASCII Character Sets E-9 Table 5-3. USB GUI Key Character Set (Continued) GUI Key Keystroke 3087 GUI W 3088 GUI X 3089 GUI Y 3090 GUI Z Note: ™ GUI Shift Keys - The Apple iMac keyboard has an apple key on either side of the space bar. Windows-based systems have a GUI key to the left of the left ALT key, and to the right of the right ALT key.
Page 360
E-10 Symbol DS6607 Product Reference Guide Table E-5. F key Standard Default Table F Keys Keystroke 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 F 10 5011 F 11 5012 F 12 5013 F 13 5014 F 14...
Page 361
ASCII Character Sets E-11 Table E-6. Numeric Key Standard Default Table (Continued) Numeric Keypad Keystroke 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock Table E-7. Extended Keypad Standard Default Table Extended Keypad Keystroke 7001 Break 7002...
Page 362
E-12 Symbol DS6607 Product Reference Guide...
Glossary Automatic Identification Manufacturers, Inc. is the trade association for manufacturers of automatic identification systems. Alphanumeric A character set that contains letters, numbers and other characters such as special symbols. Aperture The opening in an optical system defined by a lens or baffle that establishes the field of view.
Page 364
GL-2 Symbol DS6607 Product Reference Guide Bar Code Density The number of characters represented per unit of measurement (e.g., characters per inch). Bar Code Reader A device used to read or decode a bar code symbol. Bar Code Symbol The combination of symbol characters and features required by a particular...
Page 365
Glossary GL-3 CDRH Class 2 No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses no danger for unintentional direct human exposure. Character A pattern of bars and spaces which either directly represents data or indicates a control function, such as a number, letter, punctuation mark, or communications control contained in a message.
Page 366
GL-4 Symbol DS6607 Product Reference Guide Data Matrix This error correcting, 2-dimensional matrix symbology was originally developed in 1989, and a finalized design was completed in 1995 by International Data Matrix. It's capable of encoding various character sets including strictly numeric data, alphanumeric data and all ISO 646 (ASCII) characters, as well as special character sets.
Page 367
Glossary GL-5 EAN/U.P.C. A fixed-length, numeric 13-digit bar code symbol consisting of 30 dark elements and 29 intervening light elements. Each character is represented by 2 bars and 2 spaces over 7 modules. A bar may be comprised of 1, 2, 3 or 4 modules.
Page 368
GL-6 Symbol DS6607 Product Reference Guide Interleaved Bar Code A bar code in which characters are paired together, using bars to represent the first character and the intervening spaces to represent the second. LASER - Light Amplification by The laser is an intense light source. Light from a laser is all the same frequency, Stimulated Emission of Radiation unlike the output of an incandescent bulb.
Page 369
Glossary GL-7 Orientation The alignment of the symbol's scan path. Two possible orientations are horizontal with vertical bars and spaces (picket fence) and vertical with horizontal bars and spaces (ladder). Overhead The fixed number of characters required for start, stop and checking in a given symbol.
Page 370
GL-8 Symbol DS6607 Product Reference Guide Self-Checking Code A symbology that uses a checking algorithm to detect encoding errors within the characters of a bar code symbol. Skew Rotation of a bar code symbol on an axis parallel to the symbol's length.
Page 371
Glossary GL-9 Vertical Bar Code A bar code pattern presented in such orientation that the symbol from start to stop is perpendicular to the horizon. The individual bars are in an array appearing as rungs of a ladder. Visible Laser Diode (VLD) A solid state device which produces visible laser light.
Page 372
GL-10 Symbol DS6607 Product Reference Guide...
Tell Us What You Think... We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 738-4618, or mail to: Motorola One Symbol Plaza M/S B-10 Holtsville, NY 11742-1300...
Page 380
Motorola One Symbol Plaza Holtsville, New York 11742-1300 http://www.symbol.com 72E-69537-03 Revision A - March 2007...