USB Keyboard FN 1 Substitution
This option applies only to the USB Keyboard HID device. Enable this to replace any FN 1 characters in a GS1
128 bar code with a user-selected Key Category and value (see
the Key Category and Key Value).
Enable
USB Static CDC
When disabled, each device connected consumes another COM port (first device = COM1,
second device = COM2, third device = COM3, etc.)
When enabled, each device connects to the same COM port.
*Enable USB Static CDC
USB Interface 6 - 13
FN1 Substitution Values on page 4-22
*
Disable
Disable USB Static CDC
to set