Set Lengths For Matrix 2 Of 5 - Motorola DS6708 Product Reference Manual

13 - 60 DS6708 Digital Scanner Product Reference Guide

Set Lengths for Matrix 2 of 5

Parameter # L1 = F1h 6Bh, L2 = F1h 6Ch
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Matrix 2 of 5 to any length, one or two discrete lengths, or lengths
within a specific range.
•
One Discrete Length - Select this option to decode only Matrix 2 of 5 symbols containing a selected
length. Select the length using the numeric bar codes in
to decode only Matrix 2 of 5 symbols with 14 characters, scan Matrix 2 of 5 - One Discrete Length, then
scan 1 followed by 4. To correct an error or to change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Matrix 2 of 5 symbols containing either of
two selected lengths. Select lengths using the numeric bar codes in
For example, to decode only Matrix 2 of 5 symbols containing either 2 or 14 characters, select Matrix 2
of 5 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan
•
Length Within Range - Select this option to decode a Matrix 2 of 5 symbol with a specific length
range. Select lengths using the numeric bar codes in
to decode Matrix 2 of 5 symbols containing between 4 and 12 characters, first scan Matrix 2 of 5 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To
correct an error or change the selection, scan
•
Any Length - Scan this option to decode Matrix 2 of 5 symbols containing any number of characters
within the digital scanner's capability.
*
Matrix 2 of 5 - One Discrete Length
Matrix 2 of 5 - Length Within Range
Cancel on page D-2.
Appendix D, Numeric Bar
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
Cancel on page D-2.
Matrix 2 of 5 - Two Discrete Lengths
Matrix 2 of 5 - Any Length
Codes. For example,
Cancel on page D-2.
Codes.
For example,