2 - 6
DS6708 Digital Scanner Product Reference Guide
Scanning in Presentation Mode
Scanning with the Digital Scanner in the Intellistand
The optional Intellistand adds greater flexibility to scanning operation. When you place the digital scanner in
the stand's "cup," the digital scanner's built-in sensor places the digital scanner in presentation mode. When
you remove the digital scanner from the stand it operates in its normal hand-held mode.
Scanner
Holder (Cup)
Inserting the Digital Scanner in the Intellistand
Figure 2-5
To operate the digital scanner in the IntelliStand:
Connect the digital scanner to the host (see the appropriate host chapter for information on host
1.
connections).
Insert the digital scanner in the Intellistand by placing the front of the digital scanner into the stand's "cup"
2.
(see
Figure
2-5).
Use the Intellistand's adjustment knobs to adjust the height and angle of the digital scanner.
3.
Center the symbol in the aiming pattern. The entire symbol must be within the brackets.
4.
Upon successful decode, the digital scanner beeps and the LED turns green. For more information on
5.
beeper and LED definitions, see
Angle Adjustment Knob
Height Adjustment Knob
Table 2-1
and
Table
2-2.