Supported Interfaces; Unpacking - Motorola DS6708 Product Reference Manual

1 - 2 DS6708 Digital Scanner Product Reference Guide

Supported Interfaces

The DS6708 digital scanner supports:
•
USB connection to a host. The digital scanner autodetects a USB host and defaults to the HID keyboard
interface type. Select other USB interface types by scanning programming bar code menus.This
interface supports the following international keyboards (for Windows® environment): North America,
German, French, French Canadian, Spanish, Italian, Swedish, UK English, Portuguese-Brazilian, and
Japanese.
•
Connection to IBM 468X/469X hosts. Scan bar code menus to set up communication of the digital
scanner with the IBM terminal.
•
Standard RS-232 connection to a host. Scan bar code menus to set up proper communication of the
digital scanner with the host.
•
Wand Emulation connection to a host. The digital scanner connects to a portable data terminal, a
controller, or host which collects the data as wand data and decodes it.
•
Keyboard Wedge connection to a host. The host interprets scanned data as keystrokes. This interface
supports the following international keyboards (for Windows® environment): North America, German,
French, French Canadian, French Belgian, Spanish, Italian, Swedish, UK English, Portuguese-Brazilian,
and Japanese.
•
Scanner Emulation connection to a host. The digital scanner connects to a portable data terminal or a
controller which collects the data and interprets it for the host.
•
Synapse capability which allows connection to a wide variety of host systems using a Synapse and
Synapse adapter cable. The digital scanner autodetects the host.
•
Configuration via 123Scan

Unpacking

Remove the digital scanner from its packing and inspect it for damage. If the digital scanner was damaged in
transit, contact Zebra Support. See
shipping container; use this to return the equipment for servicing.
2
.
page xvii for contact information. KEEP THE PACKING. It is the approved