Motorola DS6708 Product Reference Manual page 141

Attach the modular connector of the Wand Emulation interface cable to cable interface port on the digital
1.
scanner (see Installing the Interface Cable on page
Connect the other end of the Wand Emulation interface cable to the wand port on the mobile computer or
2.
controller.
Select the Wand Emulation host type by scanning the appropriate bar code from
3.
Types on page 9-5.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
4.
! Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12
WARNING
volt decoder can damage the digital scanner and invalidate the warranty.
Wand Emulation Interface
1-3).
9 - 3
Wand Emulation Host