Motorola DS6708 Product Reference Manual page 111

Attach the modular connector of the RS-232 interface cable to the cable interface port on the digital
1.
scanner (see Installing the Interface Cable on page
Connect the other end of the RS-232 interface cable to the serial port on the host.
2.
Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply
3.
into an appropriate outlet.
Select the RS-232 host type by scanning the appropriate bar code from
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
1-3).
RS-232 Host Types on page
RS-232 Interface 7 - 3
7-7.