Beeper Definitions - Motorola DS6708 Product Reference Manual

2 - 2 DS6708 Digital Scanner Product Reference Guide

Beeper Definitions

The digital scanner issues different beep sequences and patterns to indicate status.
sequences that occur during both normal scanning and while programming the digital scanner.
Beeper Definitions
Table 2-1
Beeper Sequence
Standard Use
Low/medium/high beeps
Short high beep
4 long low beeps
5 low beeps
Low/high/low beeps
High/high/high/low beeps
Parameter Menu Scanning
Low/high/low/high beeps
Short high beep
Low/high beeps
High/low beeps
High/low/high/low beeps
Code 39 Buffering
High/low beeps
3 long high beeps
Low/high/low beeps
Low/high beeps
Macro PDF
2 long low beeps
3 long low beeps
4 long low beeps
5 long low beeps
Fast warble beep
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
A transmission error was detected in a scanned symbol. The data is ignored.
This occurs if the digital scanner is not properly configured. Check option setting.
Conversion or format error.
ADF transmit error. See Chapter 15, Advanced Data
RS-232 receive error.
Out of host parameter storage space. Scan
Correct entry scanned or correct menu sequence performed.
Input error; incorrect bar code, programming sequence, or Cancel scanned;
remain in ADF program mode.
Keyboard parameter selected. Enter value using numeric bar codes.
Successful program exit with change in parameter setting.
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
The Code 39 buffer was erased or there was an attempt to clear or transmit an
empty buffer.
A successful transmission of buffered data.
File ID error. A bar code not in the current MPDF sequence was scanned.
Out of memory. There is not enough buffer space to store the current MPDF
symbol.
Bad symbology. Scanned a 1D or 2D bar code in a MPDF sequence, a duplicate
MPDF label, a label in an incorrect order, or trying to transmit an empty or illegal
MPDF field.
Flushing MPDF buffer.
Aborting MPDF sequence.
Table 2-1
Indication
Formatting.
Set Default Parameter on page
defines beep
4-4.