IRC (Infrared Remote
Control) Operation
Page 14 of 17
Automatic Mode
Automatic mode will enable you to run the automatic programs on the
product.
To turn on Automatic mode:
1.
Press <AUTO> on the IRC.
2.
Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1.
Press <SPEED> on the IRC.
2.
Press <%>.
3.
Press <+> or <–> to either increase or decrease the speed of the
program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1.
Press <SOUND> on the IRC.
To adjust sound sensitivity in Sound-Active mode:
Press <SENSITIVITY> on the IRC.
1.
2.
Press <%>.
3.
Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC:
1.
Press <MANUAL> on the IRC.
2.
Press any number between 0~9 to choose your color.
To manually control the RGB percentage:
1.
Press <MANUAL> on the IRC.
2.
Press <R> (red), <G> (green), or <B> (blue) to choose your color.
3.
Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1.
Press <STROBE> on the IRC.
Press <+> or <–> to increase or decrease the strobe rate.
2.
3.
Press <STROBE> again to turn off the strobe.
To change the switching effect of the program:
1.
Press <FADE/SNAP> on the IRC.
Fade will slowly switch the effect. Snap will rapidly switch the effect.
To black out the lights:
1.
Press <BLACK OUT> on the IRC.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC will not respond to any inputs when Black Out is activated. If
the remote does not respond when a button is pressed, try pressing
<BLACK OUT>. You may have inadvertently activated Black Out.
SlimPAR™ QUAD 12 IRC User Manual (Rev. 1)