Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document. Page 4 of 18 SlimPAR T6 USB User Manual Rev. 1...
Back Panel View IR Sensor Lenses Front View WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause damage to the product. SlimPAR T6 USB User Manual Rev. 1 Page 5 of 18...
Product Additional Products You can power link up to 31 SlimPAR T6 USB products on 120 VAC or up to 52 SlimPAR T6 USB products on 230 VAC. The power linking diagram corresponds to the North American version of the...
Before mounting the product, read and follow the safety recommendations indicated in Safety Notes. Orientation The SlimPAR T6 USB may be mounted in any position; however, make sure adequate ventilation is provided around the product. · Rigging Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
Custom static colors g000–g255 Combines red, green, and blue (custom colors) b000–b255 dIM1 Dimmer speed mode, fast to slow, or off dIM2 dIM3 IR function on or off SlimPAR T6 USB User Manual Rev. 1 Page 9 of 18...
The SlimPAR T6 USB works with a DMX controller. Information about DMX is in the DMX Linking CHAUVET® Primer, which available from Chauvet website http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf. Set the product in DMX mode to control with a DMX controller. Configuration Connect the product to a suitable power outlet.
Address The SlimPAR T6 USB uses up to 8 DMX channels in an 8-CH DMX mode, which defines the highest configurable address to 505. If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetlighting.com.
Press <ENTER>. The product will only respond to low frequencies of music (bass and drums). To change the sound sensitivity on the SlimPAR T6 USB, follow the instructions below: Sound Sensitivity Press <MENU> repeatedly until SenS shows on the display.
The SlimPAR T6 USB is compatible with the IRC-6 infrared remote control from IRC-6 Infrared Chauvet. To activate IR mode, follow the instructions below: Remote Press <MENU> repeatedly until SEr shows on the display. Control Press <ENTER> to accept. Press <UP> or <DOWN> to select On or OFF.
The SlimPAR T6 USB can act as part of an expansion for the 4BAR Tri USB. For 4BAR Tri USB instructions on configuring the product for 4BAR Tri USB Expansion mode, see the User Expansion Manual for the 4BAR Tri USB.
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. SlimPAR T6 USB User Manual Rev. 1 Page 15 of 18...
Cooling System Thermal 104 °F (40 °C) Convection I/O Connectors Channel Range 3-pin XLR 3 or 8 Product Name Item Code UPC Number Ordering SlimPAR T6 USB 03031043 781462213916 Page 16 of 18 SlimPAR T6 USB User Manual Rev. 1...
3) If you are located in Mexico, contact Chauvet Mexico. 4) If you are located in Benelux, contact Chauvet Europe BVBA. 5) If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetlighting.com...
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record. Follow their instructions to request support or to return a product. Visit our website for contact details. Page 18 of 18 SlimPAR T6 USB User Manual Rev. 1...
Need help?
Do you have a question about the SlimPAR T6 USB and is the answer not in the manual?
Questions and answers