Table of Contents
Advertisement
5. T
ECHNICAL
Product
Maintenance
SlimPAR™ QUAD 12 IRC User Manual (Rev. 1)
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and mechanical wear. To maintain optimum
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
•
Unplug the product from power.
•
Wait until the product is at room temperature.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface and vents.
•
Clean the LED transparent cover with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
•
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•
Softly wipe any dirt or grime to the outside edges of the LED transparent cover.
•
Gently polish the transparent LED cover until it is free of haze and lint.
Always dry the transparent LED cover carefully after cleaning.
Page 15 of 17
Advertisement
Table of Contents
