Dimmer Mode; Irc-6 Infrared Remote Control; Irc-6 Operation - Chauvet SlimBEAM QUAD IRC User Manual

Dimmer Mode

IRC-6 Infrared
Remote Control

IRC-6 Operation

Page 14 of 19
To change or turn off the dimming curve, follow the instructions below:
1. Press <MENU> repeatedly until dIN shows on the display.
2. Press <ENTER> and one of the following will show on the display:
·
OFF
·
dIN1 (fast dimming curve)
·
dIN2 (medium dimming curve)
·
dIN3 (slow dimming curve)
3. Use <UP> or <DOWN> to cycle through the dimmer settings.
4. Press <ENTER> to select the desired setting.
The
SlimBEAM™ QUAD IRC
Chauvet.
To run the SlimBEAM™ QUAD IRC in Infrared mode, do the following:
1. Press <MENU> repeatedly until SET shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select either:
·
ON to set the product to respond to the IRC-6 remote.
·
OFF to set the product to not respond to the IRC-6 remote.
4.
Press <ENTER>.
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
between the remote and the product.
The following buttons function with this product:
·
<BLACK OUT> - Turns LEDs on/off
·
<STROBE> - Activates Strobe
·
<AUTO> - Activates Auto Program mode, P 1–P 10
·
<SPEED> - Activates speed control in auto program mode
NOTE: For strobe speed, do not press the speed button
·
<SOUND> - Activates Sound mode
·
<SENSITIVITY> - Activates sensitivity control in sound-active mode
·
<MANUAL> - Activates Custom Color Mixing mode
·
<R> - Selects red to be increased or decreased
·
<G> - Selects green to be increased or decreased
·
<B> - Selects blue to be increased or decreased
·
<A> - Selects white to be increased or decreased
·
<%> - Selects total output level to be increased or decreased in Custom Color
Mixing mode.
·
<FADE> - Activates Auto Program mode, P 6–P 9
·
<+> - Increases selected value or strobe speed
·
<-> - Decreases selected value or strobe speed
·
Number Buttons:
<0> - White
<1> - Red
<2> - Orange
<3> - Yellow
<4> - Green
·
All other buttons have no function with this product
The IRC-6 will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing <BLACK OUT>. You may
have inadvertently activated Black Out.
is compatible with the IRC-6 infrared remote control from
<5> - Cyan
<6> - Blue
<7> - Magenta
<8> - Pink
<9> - Amber
SlimBEAM™ QUAD IRC User Manual Rev. 1