Table of Contents
Advertisement
Configuration
(Standalone)
Rotation
Dimmer
IRC-6 Infrared
Remote
Control
IRC-6 Operation
Gobo Zoom™ USB User Manual Rev. 1
Set the product in one of the standalone modes to control without a DMX controller.
·
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To set the rotation direction and speed for the Gobo Zoom™ USB, follow the instructions
below:
1.
Press <MENU> repeatedly until Gobo shows on the display.
2.
Press <ENTER>.
3.
Use <UP> and <DOWN> to select one of the following:
·
StoP (for no rotation)
·
L-SP (for left rotation)
or
·
r-SP (for right rotation)
4.
Press <ENTER>.
5.
For L-SP or r-SP, use <UP> and <DOWN> to increase or decrease the rotation
speed.
6.
Press <ENTER>.
To set the dimmer value, do the following:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER> and Uxxx will show on the display:
3.
Use <UP> and <DOWN> to increase or decrease the dimmer value.
4.
Press <ENTER>.
The Gobo Zoom™ USB is compatible with the IRC-6 infrared remote control from
Chauvet. To activate IR mode, follow the instructions below:
1.
Press <MENU> repeatedly until SEr shows on the display.
2.
Press <ENTER> to accept.
3.
Press <UP> or <DOWN> to select ON or OFF.
4.
Press <ENTER>.
Rotation
To set the rotation direction:
1.
Press <AUTO> on the IRC-6.
2.
Press <+> or <–> to choose between L-SP, r-SP, or StoP.
To adjust the speed of the automatic program:
1.
Press <SPEED> on the IRC-6.
2.
Press <+> or <–> to either increase or decrease the rotation speed.
Dimmer
To adjust the dimmer level:
1.
Press <MANUAL> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the dimmer level.
Black Out
To black out the light:
Press <BLACK OUT> on the IRC-6.
This will turn off the light until the button is pressed again.
NOTE: The IRC will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing <BLACK OUT>. You may
have inadvertently activated Black Out.
Page 11 of 16
Advertisement
Table of Contents
