Sound Sensitivity; Custom Color Mixing; Dimmer; Limiter - Chauvet Freedom Strip HEX-4 User Manual

Sound Sensitivity

Custom Color
Mixing

Dimmer

Limiter

IRC-6 Infrared
Remote
Control
Page 20 of 25
To change the sound sensitivity in the Freedom™ Strip Hex-4, do the following:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Press <ENTER> and u 1–u100 will show on the display.
3. Use <UP> or <DOWN> to increase or decrease the sensitivity, until the product
responds to the beat of the music.
4. Press <ENTER>.
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
·
rxxx (red, 000-255)
·
Gxxx (green, 000-255)
·
bxxx (blue, 000-255)
·
Axxx (amber, 000-255)
·
Wxxx (white, 000-255)
·
Pxxx (UV, 000-255))
3. Press <ENTER> to cycle through the color settings.
4. When the desired color shows on the display, use <UP> or <DOWN> to select the
desired color value.
NOTE: Selecting 0 will turn the color off.
5. Repeat steps 3 and 4 until you have your desired color..
To set the dimmer curve for the Freedom™ Strip Hex-4, do the following:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select either:
·
dIM1 for fast dimming.
·
dIM2 for medium dimming.
·
dIM3 for slow dimming.
·
OFF for instantaneous dimming
4. Press <ENTER>.
The Freedom™ Strip Hex-4 has a built-in limiter function, which extends the battery life
during operation. To activate or deactivate the limiter, follow the instructions below:
1. Press <MENU> repeatedly until Limi shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select either:
·
on to enable extended battery life.
·
oFF to disable extended battery life.
4. Press <ENTER>.
The Freedom™ Strip Hex-4 is compatible with the IRC-6 infrared remote control from
Chauvet. To run the Freedom™ Strip Hex-4 in IR mode, do the following:
1. Press <MENU> repeatedly until SET shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select either:
·
on to enable IRC control.
·
oFF to disable IRC control.
4. Press <ENTER>.
Freedom™ Strip Hex-4 User Manual Rev. 1