Irc-6 Infrared Remote Control; Irc-6 Operation - Chauvet Beamer 8 User Manual

Table of Contents

Advertisement

IRC-6 Infrared
Remote
Control

IRC-6 Operation

Page 12 of 17
The Beamer 8 is compatible with the IRC-6 infrared remote control from Chauvet. To
activate IR mode, follow the instructions below:
1.
Press <MENU> repeatedly until SEt shows on the display.
2.
Press <ENTER> to accept.
3.
Press <UP> or <DOWN> to select on or oFF.
4.
Press <ENTER>.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.
Press <AUTO> on the IRC-6.
2.
Press any number between <1>~<9> to choose between the different auto
programs.
To adjust the speed of the automatic program:
1.
Press <SPEED> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1.
Press <SOUND> on the IRC-6.
2.
Press any number between <1>~<9> to choose between the different sound
programs.
Manual Color Control
To manually control the RGB:
·
Press <R> (red), <G> (green), or <B> (blue) to choose your color.
Miscellaneous Operation
To black out the lights:
Press <BLACK OUT> on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>. You
may have inadvertently activated Black Out.
Beamer 8 User Manual Rev. 1

Advertisement

Table of Contents
loading

Table of Contents