Handlebar Controls, Left Side - Benelli TnT1130 Use And Maintenance

3.3

Handlebar controls, left side

High beam flasher button
Press the button repeatedly.
Control Lights
Lights on
Low or high beam on
Control Turn indicator
Shifting the lever to the left or right switches
on the left or right turn indicators. The switch
then returns to the central position.
Press to turn off the indicators.
Horn button
Press to operate the warning horn.
Clutch lever
It is used to engage/disengage the clutch.
Control Lights
Pushing the switch you can turn the sidelights into the headlights or dipped headlights.
Low/high beam button
When the light switch is in the position, the low beam is on. The high beam can be switched on by pressing the
button when allowed by the traffic and road conditions.
Control Turn indicator
It is used to show the rider's intention to change direction or lane.
WARNING: Failure to switch the turn indicators on or off at the right time may cause an accident.
Always switch on the indicators before turning or changing lanes.
Then be sure to switch off the indicators after completing the operation.
Horn button
It is used to attract the attention of other road users in case of danger.
High beam flasher button
It is used to attract the attention of other road users in case of danger. When the high beam is on, the function is
inactive.
Start button
It is used to visualize all the functions of the LCD display.
Clutch lever
Move towards/away from the handgrip to
release/engage
the clutch.
17
18