Replacing The Fuses - Benelli TnT1130 Use And Maintenance

6.11

Replacing the fuses

The replacement of the fuses has to be performed only by
a Benelli authorized service center. Only in case of extreme
urgency and if it is not possible to have a specialized tech-
nical assistance, the operation can be carried out by the
owner according to the indications provided below.
Turn the ignition key on the "OFF" position be-
fore checking or replacing the fuses, in order
to avoid a short circuit with subsequent dam-
age to other electric parts of the motorcycle.
The recharge fuse is located on the left side of the mo-
torcycle, in the position shown in the figure.
The service fuses are found under the passenger sad-
dle; remove the saddle to gain access to the fuses.
Remove the glovebox.
Replace the blown fuse and refit the cover. To identify
the function of the fuses, refer to the information shown
on the adhesive label.
Spare fuses 10A
Reserve fuel
Cooling fans
General
Injectors
Lights
WARNING
Never replace a fuse with a rating other
than that precribed, in order to avoid
damage to the electrical equipment of the
motorcycle which could lead to a fire.
Spare fuses 15A
Spare fuses 15A
Recharge fuse
Spare fuse
77
78