Benelli TnT1130 Use And Maintenance page 36

To gain access to the coolant filler cap, remove the pas-
senger saddle.
Remove the filler cap and top up using the coolant rec-
ommended in the lubricants and liquids table.
After the reset time, reassemble carefully the radiator
cap and the closing cover.
Coolant can damage painted and plastic
parts.
When you top up the coolant level, be
careful not to spill coolant on any part of
the motorcycle. If you do spill coolant on
your motorcycle, immediately wipe it
away using a clean cloth.
6.6 Checking the wear of the brake pads
WARNING
If the brake pads are excessively worn out, the effectiveness of the braking system decreases,
increasing the risk of accidents. Check frequently, from a Benelli Authorized Workshop, the
wear and tear of the linings and, wherever need, make them replaced.
Ensure that the new pads are suitably broken in.
Limit of the wear and tear of the linings A: 3,5 mm (0.14 in).
Coolant filler cap
67
68