Handlebar Controls, Left Side - Benelli TORNADO Tre Novecento 900 Owner's Manual

3.3

Handlebar controls, left side

Clutch lever
It is used to engage/disengage the clutch.
Control Lights
Shifting control from the home position (lights out) turns on the parking lights and the low/high beams.
When control is in the low/high beam position, it is possible to toggle between the two modes pressing
the proper button.
Low/high beam button
When the light switch is in the
pressing the button when allowed by the traffic and road conditions.
Control Turn indicator
It is used to show the rider's intention to change direction or lane.
WARNING: Failure to switch the turn indicators on or off at the right time may cause an
accident.
Always switch on the indicators before turning or changing lanes.
Then be sure to switch off the indicators after completing the operation.
Horn button
It is used to attract the attention of other road users in case of danger.
High beam flasher button
It is used to attract the attention of other road users in case of danger. When the high beam is on, the
function is inactive.
Mode button
It is used to visualize all the functions of the LCD display.
Clutch lever
Move towards/away from the handgrip to release/engage
the clutch.
Control Lights
Low/high beam button
Shift the light switch to the
Button not pressed in
Button pressed in
Control Turn indicator
Shifting the lever to the left or right switches on the left
or right turn indicators. The switch then returns to the
central position. Press to turn off the indicators.
Horn button
Press to operate the warning horn.
High beam flasher button
Press the button repeatedly.
Mode button
Repeatedly press to enter the various functions of the
LCD display.
position, the low beam is on. The high beam can be switched on by
Low or high beam on
Lights on
Lights out
position
: low beam
: high beam
17
18