Benelli TnT1130 Use And Maintenance page 33

Hide thumbs Also See for TnT1130:

Table of Contents

6.3

Table of lubricants and fluids

Description

Engine lubrication oil *

Coolant

Brake and clutch fluid

Drive chain lubrication oil

* :

For the availability of the suggested product, Benelli suggests to directly apply to the Authorized Dealers

or Workshops. If the above described lubricant is not available, Benelli suggests to use a fully synthetic

engine oil having characteristics equal or better than the ones prescribed in the following standards:

• API SJ

• ACEA A3

• JASO - MA CC MC G4

6.4

Checking the engine oil level

Check the oil level while the engine is not running, and

has been allowed to cool down for at least ten minutes

after a ride.

The check must be performed after placing the

motorcycle in an upright position on a horizontal surface.

The level must be between the MAX and MIN marks on

the crankcase.

If the oil level is below the MIN mark, top up.

Do not start the engine if the oil level is

below the MIN mark.

Table of Contents