Left Handlebar Switch - Benelli TnT300 Owner's Manual

PRIMARY PARTS
"ON" position:
the electrical circuit is on and the engine can be started.
"LOCK" position:
In this condition, the vehicles handlebars are locked to prevent theft. To unlock the vehicle insert the key and turn it to
the right.

LEFT HANDLEBAR SWITCH

1. CLUTCH LEVER
When starting the engine or shifting, pull in the clutch
lever to disengage the transmission.
2. HIGH & LOW BEAM SWITCH
By turning the switch to the "
beam will activate and the blue indicator on the meter will light
up; turn the switch back to the "
will switch back to the low beam.
3. TURN SIGNAL SWITCH
Turn the switch to the "
the right turn signal lamp will flash. The indicator on the meter will flash accordingly when either switch is activated.
turn the handlebars all the way to the left, press in and turn the ignition key all the way to the left.
" position, the headlight high
" position and the headlight
" position, the left turn signal lamp will flash; turn the switch to the " " position,
TnT300