3.2.1 USB CONNECTION
The USB connection is specifically for performing the ActiveSync operation via the cradle.
Generally, it will automatically establish the connection and start the ActiveSync
operation when you seat the mobile computer in the cradle. To stop the ActiveSync
operation, simply remove the mobile computer.
Tap and hold "USB Connection". The pop-up menu provides a number of options.
STATUS - DISCONNECT
If you want to stop the ActiveSync operation without removing the mobile computer from
the cradle, select [Status] and tap [Disconnect]. Alternatively, you may double-tap
from the taskbar and tap [Disconnect].
When connected, the status icon
When disconnected, this icon will disappear.
Chapter 3
Personalizing 9400 Mobile Computer
Ignore [Properties] as the associated
settings will not take effect.
will appear on the taskbar.
53