Image Capture Utility - CipherLab 9400 Reference Manual

9400 Mobile Computer

4.9 IMAGE CAPTURE UTILITY

The ImageMaker utility allows acquiring images from the built-in camera and viewing
images stored on the mobile computer. Go to Start > Programs > ImageMaker to
open the image capture program. Upon execution of the program, it takes approximately
8 seconds to turn on the camera.
a b
Workspace
a) to display an image by opening the file
b) to display a camera preview image
The icons on the toolbar, from left to right, are for these functions —
Button Description
Open an image. Any existing file in the following formats can be viewed —
JPEG
Bitmap
PNG
GIF
Save the opened image to a different file name or format.
Enter the Camera Preview Mode and display a camera preview image.
Take a picture.
Exit the Camera Preview Mode.
Configure camera settings if necessary.
Version information about the program.
Exit the program and turn off the camera.
96
Reference Manual