CipherLab 9400 Reference Manual page 68

9400 Mobile Computer
To improve the signal strength, you can move your mobile computer closer to
the wireless router or access point, or move the router or access point so it's
not close to sources of interference such as brick walls or walls that contain
metal support beams.
Note: By default, DHCP is enabled. Instead of using DHCP, select [Properties] and
specify a static IP address to the mobile computer. Only change these settings
according to your network administrator's instructions.
INITIAL CONNECTION
1) For initial connection, turn on the power to the 802.11b/g module through the
Wireless Power Manager first.
2) Double-tap
3) Select an available network and tap [Connect]. (right above)
Otherwise, you may double-tap [Add New...] and add a new network option.
For more network settings, tap [Advanced] on the Wireless Information tab. (left
below)
If you need to change the network settings, double-tap the selected network, and
the Wireless Properties dialog box appears for configuration. (right below)
58
Reference Manual
on the taskbar.