Charging The Battery; Understanding The Battery Icons - CipherLab 9400 Reference Manual

1.1.2 CHARGING THE BATTERY

The main and backup batteries may not be charged to full for shipment. When you first
receive the package, you will need to charge batteries to full before using the mobile
computer.
Note: To charge the batteries to full, it requires approximately 8 hours for the first time.
After the initial charging, it takes only 4 hours to charge the batteries to full.
Because the internal backup battery is constantly charged from the main battery, the
initial charging requires inserting the battery pack to the mobile computer and then
seating the mobile computer in the cradle for charging. This will have both the main and
backup batteries charged at the same time. To charge the backup battery, make sure
that you slide the DIP switch inside the battery compartment to the ON position.
Note: For a new battery, make sure it is fully charged before use. Always prepare a
spare battery pack, especially when you are on the road.

1.1.3 UNDERSTANDING THE BATTERY ICONS

The battery pack is the only power source for the mobile computer to work. It also
charges the backup battery on the main board so that the data stored in SRAM can be
retained properly. Therefore, when the main battery charge goes low, you need to
replace the battery pack with a charged one or charge it as soon as possible. Most of all,
always save data before it is too late; you should backup important data on a regular
basis.
Double-tap a battery icon so that you can quickly access the [Power Properties] dialog
box.
Battery Status Icons
Warning: Data loss may occur with SRAM during low battery condition. Always save
data before running out of power or keep a fresh battery for replacement.
Description
Battery charge remaining in the main battery – The more bars, the more
power in the main battery.
Main battery is ready for charging.
Main battery charge becomes low and needs charging.
Main battery charge becomes very low and needs charging immediately.
Chapter 1 Using 9400 Mobile Computer
11