Connection - CipherLab RS51 Reference Manual

CONNECTION

Via Bluetooth or WLAN
 Connection may fail when the mobile computer is around other wireless machines or
power cables as the radio frequencies of those may cause interferences.
 If communication fails, move the devices much closer to each other, and try to
communicate again
 After turning on, Bluetooth power is sustained even when the mobile computer is
suspended. However, if the power mode is switched to Airplane Mode, Bluetooth power
will be turned off regardless of the settings.
To a charging cradle
Do not insert the mobile computer to a charging cradle if water or drippings are staying

on the device.
The LED indicator on a charging cradle shows the status of battery charging only; the

status of terminal charging is shown on the device itself.
Not Charging could be the result of battery damage, battery's failure to touch the

connector or AC plug coming off.
Charging error could be due to high battery temperature.

CARE & MAINTENANCE
This mobile computer is intended for industrial use. The mobile computer is rated IP67,

however, damage may be done to the mobile computer if it is exposed to extreme
temperatures or soaked in water.
When the body of the mobile computer gets dirty, use a clean, wet cloth to wipe off

dust and debris. DO NOT use bleaches or cleaners.
Use a clean, non-abrasive, lint-free cloth to wipe dust off the LCD touch screen. DO

NOT use any pointed or sharp objects against the surface. Always keep the LCD dry.
If you want to put away the mobile computer for a period of time, download the

collected data to a host computer, and then remove the battery pack from the mobile
computer's battery compartment. Store the mobile computer and battery pack
separately.
If you encounter malfunction on the mobile computer, write down the specific scenario

and consult your local sales representative.
- 7 -
Important Notices