Screen Control - CipherLab 9400 Reference Manual

9400 Mobile Computer

4.7 SCREEN CONTROL

Screen Control lets you change the orientation and resolution of the screen, but it only
allows one change at a time. Go to Start > Programs > ScreenControl to open the
Screen Control utility.
You can change the screen orientation from portrait at zero degrees (default) to 90,
180, and 270 degrees.
If you are using a VGA screen, you can even switch the resolution from VGA to QVGA,
and vice versa. The switching of screen resolution needs to take effect after a system
reboot, and therefore, the screen orientation will be reset to default.
90
Reference Manual
Change either "orientation"
or "resolution" at a time.