Panic Alarm Calls; Concierge Service - urmet domus 1138/18 Manual

Calling a queued apartment station
To call a queued apartment station, press the Call from Queue key
Note: calls to queued apartment stations can be made only with
the handset off-hook, and no other apartment stations are
connected.
Deleting a call from queue memory
The switchboard attendant can delete calls stored in the queue memory
one at a time until the memory is empty and LED
code A100 is to be deleted, for example, the display will show:
23/05/2000
0001
When key is pressed, the following message will appear on the
M
display:
23/05/2000
0001
The deletion operation is concluded by pressing key
seconds. If the key is not pressed, the entire operation will be ignored.
Note: queued calls are automatically deleted from memory in the
following cases:
• The switchboard station calls the queued apartment station,
and the latter answers.
• The apartment station has also queued a call at another
switchboard station in the system. This second switchboard
station calls the queued apartment station, and the latter
answers.
• The apartment station has also queued a call at another
switchboard station in the system, and this second
switchboard station deletes the queued call from memory.

PANIC ALARM CALLS

The switchboard station can receive panic alarm calls from apartment
stations programmed for this function.
Panic alarm calls are handled in the same way as any other call
originating from apartment stations, except that they are identified by
a prolonged ringing tone at the switchboard station and the calling
station's code will be followed by an exclamation point on the display.
The queue memory LED will flash to indicate that there are one or
more panic alarm calls in memory. In all other respects, queued panic
alarm calls are handled in the same way as ordinary apartment station
calls. Example: panic alarm call from apartment station 1634:
1634!
23/05/2000
0001
If the handset is picked up within 10 seconds, the device will be ready
for communication between the switchboard station and the apartment
station, and the display will show:
8
−−−− sec.5a
GUARD DOOR SWITCHBOARD STATION Ref. 038/40
OPERATING INSTRUCTIONS
goes off. If call
M
08:10:00
02 A100
08:10:00
OK
again within 3
M
08:10:00
.
M
23/05/2000
0001
This indicates that the switchboard station is connected to apartment
station 1634 on voice line 1. The display will be cleared when the call
ends.
If the switchboard attendant does not pick up the handset within 10
seconds, the panic alarm call will be stored in queue memory:
23/05/2000
000101*1634!
LED will flash.
M

CONCIERGE SERvICE

When the switchboard station is configured for Day service in mode A,
it can intercept calls from main entrance panels to apartment stations
in its assigned zone, as well as make and receive calls to and from
apartment stations.
Upon receiving a call from the main entrance panel, the switchboard
station activates the ringer for the programmed period, using a
distinctive ringing tone to distinguish such calls from those made from
an apartment station. The switchboard station display will show the
entrance panel code (from 001 to JJJ) and the code dialed by the panel
user (from 0000 to JJJJ). For example, if main entrance panel 100
calls apartment station B123 and the switchboard station intercepts
the call, the display will show:
100-B123
23/05/2000
0001
If the switchboard station is combined with a video module, the latter will
be activated. When the handset is picked up, the switchboard station
automatically connects the voice line with the main entrance panel:
23/05/2000
0001
The attendant speaks to the caller and, if appropriate, can call apartment
station B123 or another apartment station. The "bell" symbol indicates
that the switchboard station can call code B123 directly by pressing call
button , without entering the code. The display will show:
100 B123
23/05/2000
0001
1634
08:10:00
08:10:00
08:10:00
100 B123
08:10:00
08:10:00
DIGIVOICE - Technical Manual