Voice Channel Switchover Keys - urmet domus 1138/18 Manual

If the called apartment station answers, the attendant can put the main
entrance panel in direct communication with the apartment station by
pressing key . The display will show:
100 B123
23/05/2000
0001
At the end of the conversation (i.e., when the apartment station
doorphone is hung up), the display will be cleared.
While using the concierge service to handle a call between a main
entrance panel and an apartment station, the switchboard station can
put the apartment station on hold and switch the voice line to the main
entrance panel by pressing key
hold and switch the voice line to the apartment station by pressing key
, or reestablish direct communication between the main entrance
panel and the apartment station by pressing key
Example: Handling calls with a single voice channel
Main entrance module 001 calls apartment station 123C. The
switchboard station intercepts the call and rings the apartment station.
The display shows:
001 123C
23/05/2000
0001
At this point, the switchboard attendant can establish direct
communication between the main entrance panel and the apartment
station by pressing key . The display will show:
001 123C
23/05/2000
0001
Alternatively, the switchboard attendant can press key
caller at the main entrance panel again.
In general, once the switchboard attendant has intercepted a call
from a main entrance panel and called the apartment station, he can
activate the attendant barge-in feature at any time. In other words, the
attendant can talk to the caller at the entrance panel by pressing key
, talk to the apartment station by pressing key
establish direct communication between the entrance panel and
apartment station by pressing key
Note: all operations must be performed with the handset off-hook.

vOICE CHANNEL SWITCHOvER KEYS

Depending on installation, the switchboard station can manage 1 or 2
voice channels 'simultaneously'. Status of the two voice channels is
shown on the switchboard station display: the first display line indicates
status of voice channel 1, while the second line refers to voice channel
2. The symbol will appear at the beginning of the first or second
display line to indicate which of the two voice channels is currently
being used by the switchboard station.
When the switchboard station has calls on both voice channels, it can
switch service from one channel to the other using key
DIGIVOICE - Technical Manual
GUARD DOOR SWITCHBOARD STATION Ref. 038/40
OPERATING INSTRUCTIONS
08:10:00
, put the main entrance panel on
.
08:10:00
08:10:00
to talk to the
, or, alternatively,
.
.
1 2
Example: Handling calls with two voice channels
In systems with two voice channels, the switchboard station
automatically selects the channel to be used for a call. However, if calls
are received from two different main entrance panels, the switchboard
attendant can handle both 'simultaneously' by switching from one
entrance panel to the other. The switchboard station can also establish
communication between the two entrance panels and the respective
apartment stations, and then use the barge-in feature with each call as
described in the previous example. Key
voice channels.
Say, for example, that the switchboard station has intercepted a call
from main entrance panel 001 to apartment station 1000 in line 1, and
is talking to the caller at the entrance panel. The display will show:
001 1000
23/05/2000
0001
At this point, a visitor at main entrance panel 002 calls apartment
station 2000 on line 2, and the switchboard station intercepts the call.
The display will now show:
001 1000
002-2000
23/05/2000
0001
The switchboard attendant can choose between three different
operations:
1) The attendant can cut off communication with main entrance panel
1 by hanging up the handset. The display will show:
002-2000
23/05/2000
0001
The attendant can then pick up the handset and talk to the visitor
at main entrance panel 2; the display will show:
002 2000
23/05/2000
0001
2) The attendant can press key
hold and switch the line to main entrance panel 2. The display will
show:
001 1000
002 2000
23/05/2000
0001
is used to switch between
1 2
08:10:00
08:10:00
08:10:00
08:10:00
to put main entrance panel 1 on
1 2
08:10:00
sec.5a −−−−
9