How To Interpret The Reports; How To Turn Off The Screen (Stand-By); How To Send A Panic Alarm - urmet domus IPERCOM VOG7 1761 User Booklet

1.4

HOw tO INtERPREt tHE REPORtS

The bar at the top right of the screen shows status information:
A new notification is signalled by the blue LED flashing on the Home button of the IP Video Door Phone
1761/32, the relevant icon in the upper left corner and the corresponding item in the scrolling menu.
The possible notifications are:
micro SD Card in.
Presence of an unread text message (Chat).
New contact request.
New Post-it not yet listened to.
missed Call.
Video message not yet viewed.
Panic Alarm sent/cancelled.
Gesture or voice commands enabled
Door open detection
1.5

HOw tO tURN Off tHE ScREEN (StAND-by)

To manually turn off the screen, press the Home key on the IP video door phone 1761/32.
The screen turns off automatically:
• when the user-programmable time-out delay has elapsed (see paragraph Configurations in the
Parameter configuration
• at the end of an incoming call, if the screen was previously off.
1.6

HOw tO SEND A PANIc AlARm

wARNINg! the Panic alarm function requires that:
the video door phone system has a switchboard;
•
the system has been properly set up (for more information, check the Ipercom
•
manual on www.urmet.com);
there is a switchboard operator on duty;
•
the switchboard operator has been properly trained on what to do in the event that
•
a panic alarm is received.
8
Automatic door opening (if this feature is enabled).
Set the following device states: At home / Recording / Divert / Remote
(only one active at a time).
Bluetooth Connection active.
Active Wifi or second lAN connection (only one active at a time).
lAN connection to Ipercom network
 The icon does not appear in Link Local
Time.
booklet");
DS1761-028